跳到主要內容區
  1. 首頁
  2. 系所成員
  3. 師資陣容
  4. 專任師資
  5. 溫博浚

溫博浚

姓名職稱 溫博浚 副教授 溫博浚 副教授
研究室 機械系館A棟301室
電　話 (02) 2462 2192 ext. 3247
傳　真 (02) 2462-0836
E-mail Jiunner@ntou.edu.tw
學　歷 國立交通大學機械工程學系博士
經　歷 國立臺灣海洋大學機械與機電工程系助理教授
工研院量測中心光輻射研究室研究員兼室主任
日本産業技術総合研究所計量標準総合センター客座研究員
研究領域 電光機械系統設計與控制、人工智慧(AI)演算
自動影像光學檢測、感測器量測應用
實驗室 電光機械系統控制實驗室 A303 (分機：3260)
教學課程 大學部：Matlab程式語言、電路學、應用電子學、電機機械、感測原理與應用、機電整合導論
研究所：光電機械系統整合、類神經網路
著　作 Project　│Refereed Papers　│ Conference Papers　│ Other Publications │ Patents │ Award

 Project

  1. “船舶點雲數據之累積與初步分析研究”，工業技術研究院，111.12.1~112.5.31.。
  2. “無人飛行器之人工智慧影像追蹤演算法研究”，橙森智能股份有限公司，111.7.1~111.12.31.。
  3. “無人機救災之影像感測與分析實務人才培訓班II”，行政院勞動部，111.6.1~112.5.31.。
  4. “無人機救災之影像感測與分析實務人才培訓班”，行政院勞動部，110.11.1~111.10.31.。
  5. “人工智慧影像之紫外光於脂類的特性分析”，工業技術研究院，110.9.1~111.2.28.。
  6. “石墨烯材料之軟性薄膜聚合物基板的抗彎曲特性改善與量測分析研究”，MOST 110-2221-E-019 -058 -MY2，科技部專題研究計畫，110.8.1~112.7.31.。
  7. “無人機環境監測訓練班”，行政院勞動部，110.4.1~110.12.31.。
  8. “多形態穿透顯示光學元件機械性質分析”，工業技術研究院，109.10.1~110.3.31.。
  9. “影像人工智慧海面汙染量測分析II”，工業技術研究院，109.7.1~109.12.31.。
  10. “影像人工智慧海面汙染量測分析”，工業技術研究院，109.4.1~109.6.30.。
  11. “非接觸紅外油汙量測分析”，工業技術研究院，108.10.1~108.12.31.。
  12. “利用影像式光學干涉術於軟性石墨烯薄膜基板之彎曲機械性質量測與分析研究”，MOST 108-2221-E-019-056，自動化學門，科技部專題研究計畫，108.8.1~109.7.31.。
  13. “自動化影像式單方向共光程干涉術於軟性透明多層薄膜基板之介面應力研究”，MOST 107-2221-E-019-053，自動化學門，科技部專題研究計畫，107.8.1~108.7.31.。
  14. “時頻大數據類神經網路之智慧養殖動態行為診斷計畫”，百晟科技有限公司，107.7.1~108.6.30.。
  15.  “穿戴式採收和搬運智慧人機輔具之開發與應用II”，107農科-14.2.11-科-a9，行政院農業委員會主管科技計畫，107.1.1~107.12.31.。
  16. “穿戴式採收和搬運智慧人機輔具之開發與應用”，106 農科-18.2.1-科-a9，行政院農業委員會主管科技計畫，106.3.1~106.12.31.。
  17. “軟性透明導電基板全面性摺疊測試之自動化影像式殘留摺疊、熱應力和電性特性量測與分析研究”，MOST 105-2221-E-019-029，自動化學門，科技部專題研究計畫，105.8.1~106.7.31.。
  18. “利用自動化影像相位延遲檢測技術於軟性透明導電基板全面性摺疊測試之應力集中與電性分佈分析研究”，MOST 104-2218-E-019-002，自動化學門，科技部專題研究計畫，104.9.1~105.8.31.。

 Refereed Papers

  1. Bor-Jiunn Wen and Che-Chih Yeh “Automatic Fruit Harvesting Device Based on Visual Feedback Control,” Agriculture, vol. 12, no. 12, 2050, 2022. (SCI, Impact Factor = 3.408)
  2. Bor-Jiunn Wen, Che-Rui Chang, Chun-Wei Lan, and Yi-Chen Zheng, “Magnus-forces Analysis of Pitched-Baseball Trajectories Using YOLOv3-tiny Deep Learning Algorithm,” Applied Sciences-Basel, vol. 12, no. 11, 5540, 2022. (SCI, Impact Factor = 2.838)
  3. Bor-Jiunn Wen and Jui-Jen Hsu, “Thermomechanical Property Measurement of Flexible Transparent Conductive-film Substrates based on Whole Folding Test by Reflective-type Common-path Liquid-crystal Modulating Interferometry,” IEEE Transactions on Instrumentation & Measurement, vol. 71, pp. 1-11, 2022. (SCI, Impact Factor = 5.332)
  4. Bor-Jiunn Wen and Jui-Jen Hsu, “Curved-mechanical Characteristic Measurements of Transparent Conductive Film-coated Polymer Substrates using Common-path Optical Interferometry,” Coatings, vol. 11, no. 7, 766, 2021. (SCI, Impact Factor = 2.881)
  5. Bor-Jiunn Wen, Chia-Hung Kao, and Che-Chih Yeh, “Intelligent Wearable Device of Auxiliary Force Using Fuzzy-Bayesian Backpropagation Control,” Journal of Intelligent and Fuzzy Systems, vol. 40, no. 4, pp. 7981-7991, 2021. (SCI, Impact Factor = 1.851)
  6. Bor-Jiunn Wen, Yung-Sheng Lin, Hsing-Min Tu, and Cheng-Chang Hsieh, “Health-diagnosis of Electromechanical System with a Principal-Component Bayesian Neural Network Algorithm,” Journal of Intelligent and Fuzzy Systems, vol. 40, no. 4, pp. 7671-7680, 2021. (SCI, Impact Factor = 1.851)
  7. Bor-Jiunn Wen, Pin-Hsuan Hung, and Ting-Yu Tseng, “Optical Inspection of Neural Network Vision Alignment Algorithm for Flexible Displays Based on Whole-folding Test,” Instruments Today, Vol. 226, 2021.
  8. Bor-Jiunn Wen, Shih-An Huang, and Ting-Yu Tseng, “Experimental analysis of interfacial shear stress and electrical resistance of indium tin oxide (ITO) coated polyethylene terephthalate (PET) films for a whole folding test,” Journal of Plastic Film & Sheeting, Vol. 36, No. 2, pp. 130-150, 2020. (SCI, Impact Factor = 1.714)
  9. Bor-Jiunn Wen, Pen-Cheng Wang, and Pin-Hsuan Hung, “Numerical and experimental analysis of the effect of metal tie layers on improving electrical properties of gold coated poly (dimethylsiloxae) flexible multi-layered films during folding,” Journal of Plastic Film & Sheeting, Vol. 35, No. 2, pp. 135-156, 2019. (SCI, Impact Factor =1.714)
  10. Bor-Jiunn Wen, Kai-Chen Syu, and Chia-Hung Kao, “Dynamic Proportional-Fuzzy Grip Control for Robot Arm by Two-dimensional Vision Sensing Method,” Journal of Intelligent and Fuzzy Systems, Vol. 36, No. 2, pp. 985-998, 2019. (SCI, Impact Factor = 1.637)
  11. Bor-Jiunn Wen and Shih-An Huang, “Residual Stress Image Inspections based on Bending Testing for Flexible Transparent Conducting Substrates by Single-direction Common-path Image Interferometry,” IEEE Sensors Journal, Vol. 19, No. 5, pp. 1701-1709, 2019. (SCI, Impact Factor = 3.076)
  12. Bor-Jiunn Wen, Chang-Chun Lee, Ming-Wei Chang, Hsuan-Kai Lin, Yan-Yu Liou, and Sen-Wen Cheng, “Surface Properties of Nano-film Type Patterning Electrode on Flexible Substrate for Bending Test,” Science of Advanced Materials, Vol. 9, pp. 17–21, 2017. (SCI, Impact Factor =1.812)
  13. Jiong-shiun Hsu, Bor-Jiunn Wen, Wei Li, and Chen-Wei Yang, “Measuring glass transition temperatures of polymers by using phase-stepping shadow moiré,” Polymer Testing , Vol. 57, pp. 58-66, 2017. (SCI, Impact Factor =2.350)
  14. Bor-Jiunn Wen, Tze-An Liu, Hsing-Cheng Yu, Shih-Fang Chen, and Yuh-Chuan Cheng, “Non-Contact Resistance Measurement of Transparent Electrodes Deposited on Flexible Display Substrates under Repetitive Bending Test by Terahertz Time Domain Spectroscopy,” Displays, Vol. 45, pp. 58-62, 2016. (SCI, Impact Factor =1.903)
  15. Jiong-shiun Hsu, Chang-Chun Lee, Bor-Jiunn Wen, Pei-Chen Huang, and Chi-Kai Xie, “Experimental and Simulated Investigations of a Thin Polymer Substrate with ITO Coatings under Fatigue Bending Loadings,” Materials, Vol. 9, No. 720, 2016. (SCI, Impact Factor =2.728)
  16. Bor-Jiunn Wen, Chang-Chun Lee, Jiong-Shiun Hsu, Pei-Chen Huang, and Chia-Hao Tsai, “Investigation of Optical and Flexible Characteristics for Organic-Based Cholesteric Liquid Crystal Display by Utilizing Bending and Torsion Loadings,” IEEE/OSA Journal of Display Technology, Vol. 11, No. 9, pp. 682-688, 2015. (SCI, Impact Factor= 2.241)
  17. Bor-Jiunn Wen, Jiong-Shiun Hsu, and Wen-Chun Liu, “Two-dimension Phase-retardation Distribution Inspections for Flexible Displays by Using Full-field Liquid-Crystal Modulating Common-path Interferometry,” Japanese Journal of Applied Physics, Vol. 53, 05HB03, 2014. (SCI, Impact Factor= 1.067)
  18. Bor-Jiunn Wen and T. S. Liu, “Optimal Fast-Response Sliding-Mode Control for Flexible-Substrate Measurement,” Control Engineering Practice, Vol. 21, pp. 593-603, 2013. (SCI, Impact Factor= 1.912)
  19. Pen-Cheng Wang, Li-Hung Liu, Desalegn Alemu, Kuan-Hsun Li, Bor-Jiunn Wen, Tzong-Shi Liu, and Chih-Wei Chu, “Transparent electrodes based on conducting polymers for display applications,” Displays, Vol. 34, pp. 301-314, 2013. (SCI, Impact Factor= 1.101)
  20. Bor-Jiunn Wen and Wen-Chun Liu, “Color-property evaluation for e-Paper Displays by Using Colorcheckers,” Measurement Information, Vol. 151, 2013.
  21. Bor-Jiunn Wen, “IEC International Standards for Flexible Displays,” The Chinese Institute of Electrical Engineering Magazine, May, 2013.
  22. Jiong-Shiun Hsu, Bor-Jiunn Wen, and Po-Yu Chen, “Full-Field Deflection Measurement of the Flexible Transparent Sheets,” Polymer Testing, Vol. 31, No. 8, pp. 1105-1114, 2012. (SCI, Impact Factor= 1.608)
  23. Bor-Jiunn Wen and T. S. Liu, “Edge Contrast Failure Analysis on Vision Angle of Human Eyes for Curve Displays,” IEEE Journal of Display Technology, Vol. 8, pp. 418-423, 2012. (SCI, Impact Factor = 1.695)
  24. Bor-Jiunn Wen and Wen-Chun Liu, “A study of Paper-like and Color Characteristics Measurement for e-Paper Displays,” Measurement Information, Vol. 146, 2012.
  25. Bor-Jiunn Wen and T. S. Liu, “Flexible-characteristics Inspection System for Flexible Substrates by Using Image Feedback Control,” Displays, Vol. 32, pp. 296-307, 2011. (SCI, Impact Factor = 1.210)
  26. Yen-Liang Chen, Hung-Chih Hsieh, Wang-Tsung Wu, Bor-Jiunn Wen, Wei-Yao Chang, Der-Chin Su, “An Alternative Bend-testing Technique for a Flexible Indium Tin Oxide Film,” Displays, Vol. 31, pp. 191-195, 2010. (SCI, Impact Factor = 1.210)
  27. Bor-Jiunn Wen and Tzong-Shi Liu, “A Study of Optical Characteristics Measurement for Flexible Display in Bending,” Optical Engineering, Vol. 108, 2009.
  28. Bor-Jiunn Wen and Tzong-Shi Liu, “Design and Fabrication of Inspection Platform for Flexible Electronics,” Measurement Information, Vol. 129, 2009.
  29. Hsin-Yi Ko, Bor-Jiunn Wen, Shu-Fei Tsa, and Guo-Wei Li, “A High-Emissivity Blackbody with Large Aperture for Radiometric Calibration at Low-Temperature,” International Journal of Thermophysics, Vol. 30, pp. 98-104, 2009. (SCI, Impact Factor = 0.889)
  30. Cheng-Hsien Chen, Bor-Jiunn Wen, and Hsin-Yi Ko, “The Key-Application -Parameter Characteristics of Flexible Display,” Measurement Information, Vol. 124, 2008.
  31. Yung-Chiang Chung, Bor-Jiunn Wen, and Yu-Chen Lin, “Optimal Fuzzy Sliding-mode control for Bio-microfluidic Manipulation,” Control Engineering Practice, Vol. 15, pp. 1093-1105, 2007. (Corresponding author) (SCI, Impact Factor = 1.263)
  32. Y. C. Chung, B. J. Wen, C. Y. Te, and C. D. Chueh, “A study of Bio-Microfluidic Manipulation Using Optimal Fuzzy Sliding-Mode Control,” Instruments Today, Vol. 160, 2007.
  33. Bor-Jiunn Wen, “Radiation Temperature Distribution Measurement for Big-aperture Low-temperature Blackbody,” Measurement Information, Vol. 117, 2007.
  34. Bor-Jiunn Wen and Bin-Cheng Yao, “Scanning Thermal Microscopy,” Measurement Information, Vol. 106, 2005.
  35. Gwo-Sheng Peng and Bor-Jiunn Wen, “Nano-metrology Applications of Scanning Probe Microscopy,” Machinery Monthly, May, 2004.

 Conference Papers

  1. Yu-Chia Hsiao, Bor-Jiunn Wen, “Measurement and Analysis of Tensile Stress on Flexible Conductive Patterned Substrates using Image Optical Flow Method,” The 39th National Conference on Mechanical Engineering of Chinese Society of Mechanical Engineering, Miaoli, Taiwan, Dec. 2-3, 2022.
  2. Huai-Yu Chu, Bor-Jiunn Wen, “3D reconstruction and analysis of thermal images of wind turbine blades,” The 39th National Conference on Mechanical Engineering of Chinese Society of Mechanical Engineering, Miaoli, Taiwan, Dec. 2-3, 2022.
  3. Che-Yu Lee, Bor-Jiunn Wen, “Multidirectional Stress Measurement and Bending Analysis of Flexible Thin-film Substrates Using Optical Interferometry,” The 39th National Conference on Mechanical Engineering of Chinese Society of Mechanical Engineering, Miaoli, Taiwan, Dec. 2-3, 2022.
  4. Chih-hsuan Huang, Yu-Sheng Huang, Bor-Jiunn Wen, “A study of human physiological signal sensing using image optical flow method,” The 21st Conference on Nondestructive Testing Technology and 2022 Annual Meeting, CNDT 2022, Nantou, Taiwan, Oct. 27-28, 2022.
  5. Wei-Jung Lin, Chia-Kai Yen, Bor-Jiunn Wen, “A Study on Sensing and Analysis of Marine Oil Pollution,” The 45th National Conference on Theoretical and Applied Mechanics, New Taipei, Taiwan, Nov. 18-19, 2021.
  6. Yan-Hong Chen, Bor-Jiunn Wen, “A Study of Detection and Identification based on UAV at Night,” The 45th National Conference on Theoretical and Applied Mechanics, New Taipei, Taiwan, Nov. 18-19, 2021.
  7. Bor-Jiunn Wen, Che-Yu Lee, Jui-Jen Hsu, “Analysis of stress characteristics of transparent sub-nanographene film polymer substrates using curved optical interference technology,” The 45th National Conference on Theoretical and Applied Mechanics, New Taipei, Taiwan, Nov. 18-19, 2021.
  8. Bor-Jiunn Wen, Jui-Jen Hsu, Che-Yu Lee, “A Study on Temperature Characteristics of Stress-optical Parameters of Flexible Sub-nanographene Film PET Substrate Using Common-path Optical Interferometry,” The 44th National Conference on Theoretical and Applied Mechanics, Yilan, Taiwan, Nov. 26-27, 2020.
  9. Jui-Jen Hsu, Shih-An Huang, Chia-kai Yen, Bor-Jiunn Wen, “Investigation of Improving Bending Electrical Properties of Flexible Conductive-film Substrates by Interfacial Stress Analysis,” the Asian Pacific Congress on Computational Mechanics (APCOM), Taipei International Convention Center, Taipei, Taiwan, December 18-21, 2019.
  10. Jui-Jen Hsu, Shih-An Huang, Bor-Jiunn Wen, “Stress Analysis of Flexible Plastic Substrates based on Conductive films by Optical Common-path Interferometry,” the Asian Pacific Congress on Computational Mechanics (APCOM) (Keynote Speech), Taipei International Convention Center, Taipei, Taiwan, December 18-21, 2019.
  11. Jui-Jen Hsu, Bor-Jiunn Wen, “A Study of Stress Measurement of Flexible Substrates based on Temperature Characteristics of Stress-optical Coefficients,” the 36th National Conference on Mechanical Engineering of Chinese Society Mechanical Engineers, National Taiwan Normal University, Taipei, Taiwan, ROC, December 7-8, 2019.
  12. Jhen-Hao Luo, Bor-Jiunn Wen, “Ship Number Identification by Using Image Deep Learning Algorithm,” the 36th National Conference on Mechanical Engineering of Chinese Society Mechanical Engineers, National Taiwan Normal University, Taipei, Taiwan, ROC, December 7-8, 2019.
  13. Po-Han Huang, Bor-Jiunn Wen, “Food Calorie Sensing and Analysis by Using Long Short Term Memory Network Algorithm,” the 36th National Conference on Mechanical Engineering of Chinese Society Mechanical Engineers, National Taiwan Normal University, Taipei, Taiwan, ROC, December 7-8, 2019.
  14. Bor-Jiunn Wen, Pin-Hsuan Hung, Ting-Yu Tseng, “Automatic Optical Inspection of Flexible Displays for Whole-folding Test by Neural Network Vision Alignment,” The Society of Instrument and Control Engineers Annual Conference 2019 (SICE 2019), Hiroshima, Japan, September 10-13, 2019.
  15. Bor-Jiunn Wen, Ting-Yu Tseng, Shih-An Huang, “Investigation of Sliding-folding Characteristics of Flexible Displays by Using Whole-folding Testing Machine,” The 2nd Joint Symposium on Advanced Mechanical Science & Technology, Osaka Prefecture University, Osaka, Japan, November 28th - December 1st, 2018.
  16. Po-Han Huang, Bor-Jiunn Wen, “Facial Image Emotion Recognition by Neural Networks based on Histogram of Oriented Gradients,” The 2nd Joint Symposium on Advanced Mechanical Science & Technology, Osaka Prefecture University, Osaka, Japan, November 28th - December 1st, 2018.
  17. Bor-jiunn Wen, Shih-An Huang, Jui-Jen Hsu, “A Study of Automatic Optical Inspection for Interfacial Stress of Flexible Multi-Layer Substrate,” The 42ed National Conference on Theoretical and Applied Mechanics, National Taipei University of Technology, Taipei, Taiwan, ROC, November 23-24, 2018.
  18. Po-Han Huang, Bor-Jiunn Wen, “A Study of Emotional Recognition of Face Image by Backpropagation Network,” The 26th National Conference on Fuzzy Theory and Its Applications, Taoyuan, Taiwan, November 5-6, 2018.
  19. Young-Sheng Lin, Dez-Hen Xie, Wei-Wei Lee, Yu-Xi Zhou, Bor-Jiunn Wen, “Cloud-intelligent Tele-diagnosis of Electromechanical Systems by Neural Network Algorithm,” The 21st National Conference on Mechanism and Machine Design, National Taiwan Ocean University, Keelung, Taiwan, October 26-27, 2018.
  20. Che-Chih Yeh, Sheng-Chun Lin, Kuan-Kai Hsiung, Bor-Jiunn Wen, “Wearable Power Assistive Devices,” The 21st National Conference on Mechanism and Machine Design, National Taiwan Ocean University, Keelung, Taiwan, October 26-27, 2018.
  21. Bor-Jiunn Wen, Ting-Yu Tseng, Shih-An Huang, “Investigation of Mechanical and Electrical Characteristics of Flexible Conductive Polymer Substrates for Whole-folding Test,” 2018 2nd International Conference on Materials and Intelligent Manufacturing (ICMIM 2018), Sapporo, Japan, Aug. 24-26, 2018.
  22. Chia-Hung Kao, Kai-Chen SYU, Bor-Jiunn Wen, “Dynamic Grip Control of Robot Arm for Agricultural Applications,” NEW AGRICULTURE-2017 International Conference on Intelligent Agricultural Machinery in Taiwan, National Formosa University, Huwei Township/Yunlin County/Taiwan (R.O.C.), Dec. 1~2, 2017.
  23. Chia-Hung Kao, Bor-Jiunn Wen, “Wearable Devices of Assistive Knee Force for Agriculture Applications,” NEW AGRICULTURE-2017 International Conference on Intelligent Agricultural Machinery in Taiwan, National Formosa University, Huwei Township/Yunlin County/Taiwan (R.O.C.), Dec. 1~2, 2017.
  24. Shih-An Huang, Bor-jiunn Wen, “A Study of Automatic Optical Inspection for Stress-optical Coefficient of Flexible Conductive Substrate,” The 41th National Conference on Theoretical and Applied Mechanics, Tainan, Taiwan, ROC, November 24-25, 2017.
  25. Bor-Jiunn Wen, Ting-Yu Tseng, Pin-Hsuan Hung, “Investigation of Electrical Characteristics of Flexible PET/ITO Substrates for Whole-folding Test,” ISER - 193rd International Conference on Science, Technology, Engineering and Management (ICSTEM), Nagoya, Japan, July 7-8, 2017.
  26. Kai-Chen Syu, Shih-An Lee, and Bor-Jiunn Wen, “Dynamic Visual Positioning Control for Robot Arm,” Joint Symposium on Advanced Mechanical Science & Technology for Industrial Revolution 4.0, Fuzhou University, Fuzhou, China, December 1-3, 2016.
  27. Xian-Chang Li, Qi-Xuan Bu, Chia-Wen Yang, Wei-Lun Weng, and Bor-Jiunn Wen, “Fruit Calorie Analysis by Using an Automatic Visual Image Mass Measurement Method,” Joint Symposium on Advanced Mechanical Science & Technology for Industrial Revolution 4.0, Fuzhou University, Fuzhou, China, December 1-3, 2016.
  28. Bor-Jiunn Wen, “Automatic Optical, Mechanical, and Electrical Characteristics Inspection Technology for Flexible Displays,” Joint Symposium on Advanced Mechanical Science & Technology for Industrial Revolution 4.0, Fuzhou University, Fuzhou, China, December 1-3, 2016.
  29. Jing-Qi Huang, Ya-Ru Li, and Bor-Jiunn Wen, “Investigation of Automatic Optical Full-field Manufacturing-residual-stresses Inspection of flexible transparent conducting substrates,” The 40th National Conference on Theoretical and Applied Mechanics, National Chiao Tung University, Hsinchu, Taiwan, November 25-26, 2016.
  30. Chia-Wen Yang, Xian-Chang Li, Qi-Xuan Bu, and Bor-Jiunn Wen, “An Analysis Study of Fruit Calorie by Using an Automatic Vision Image Measurement,” the 24th Conference on Automation Technology, National Chung Hsing University, Taichung, Taiwan, November 4-5, 2016.
  31. Bor-Jiunn Wen, Su-Chuion Liao, and Ting-Yu Tseng, “Color-Property Measurement of Flexible Ch-LCD in Bending by Using an Automatic Bending-Test Inspection System,” The Fifth International Multi-Conference on Engineering and Technology Innovation 2016 (IMETI2016), Taichung, Taiwan, October 28-November 1, 2016.
  32. Pen-Cheng Wang, Bor-Jiunn Wen, Tung-Yuan Lee, Pin-Hsuan Hung, and Heng-yin Chen, “Investigation of Electrical Characteristics of Multi-thin-film Metal Electrodes Deposited on Flexible Polydimethylsiloxane Substrates by Using an Automatic Folding Test System,” THE 23RD INTERNATIONAL WORKSHOP ON ACTIVE-MATRIX FLATPANEL DISPLAYS AND DEVICES, Kyoto, Japan, July 6-8, 2016.
  33. Bor-Jiunn Wen, Ting-Yu Tseng, and Tsung-Ying Chung, “Phase-retardation Distribution Inspections of Transparent Electrodes Deposited on Flexible Display Substrates for Tensional Force Tests,” The 39th National Conference on Theoretical and Applied Mechanics, Taipei, Taiwan, Nov. 20-21, 2015.
  34. Bor-Jiunn Wen, Chang-Chun Lee, and Chia-Ping Hsieh, “Nano-structure Fabrication on the Nitride Films by Automatic Scanning Probe Oxidation,” 12th International Symposium on Measurement Technology and Intelligent Instruments, Taipei, Taiwan, Sep. 22-25, 2015.
  35. Jiong-shiun Hsu, Bor-Jiunn Wen, Chang-Chun Lee, Jhih-Yuan Jheng, “The effects of thermal annealing on cycling bending resistance of ITO/PET using phase shifting shadow moiré,” ThinFilms 2014, Chongqing, China, July 15-18, 2014.
  36. Jung-Mei Hsu and Bor-Jiunn Wen, “A Method of Breaking Reliability Test for Flexible Displays,” 2013 Taiwan AOI Forum & Show, Hsinchu, Taiwan, Oct. 17, 2013.(Three Place Poster Paper Award of 2013 Taiwan AOI Forum & Show, 2013.)
  37. Wen-Chun Liu and Bor-Jiunn Wen, “Display-Quality Measurement of Flexible Ch-LCD by Using an Automatic Bending Test Measurement System,” 2013 The International Conference on Flexible and Printed Electronics, Jeju Island, Korea, Sep. 11-13, 2013.
  38. Bor-Jiunn Wen, Jiong-shiun Hsu, and Yen-Liang Chen, “Retardation measurements with Large Area on a Flexible Indium Tin Oxide Film for Repetitive Bending Test,” ISEM-ACEM-SEM-7th ISEM’12 Taipei, Taipei, Taiwan, Nov. 8-11, 2012.
  39. Pen-Cheng Wang, Li-Hung Liu, Bor-Jiunn Wen, and Tzong-Shi Liu, “Bendability Characterization of All-polymer Transparent Electrodes Based on Cohesive Polypyrrole Thin Films Chemically Deposited on Flexible Poly(ethylene terephthalate) Substrates,” 2012 The International Conference on Flexible and Printed Electronics, Tokyo, Japan, Sep. 6-8, 2012.
  40. Yun-Bai Chang, Bor-Jiunn Wen, and Chang-Franw Lee, “The Research of Visual Performance with Color Electronic-paper Display,” 2012 International Conference of Innovation & Design, Taipei, Taiwan, Apr. 16-22, 2012.(Excellent Paper Award of 2012 International Conference of Innovation & Design, 2012.)
  41. Po-Yu Chen, Jiong-Shiun Hsu, and Bor-Jiunn Wen, “Full-Field Deflection Measurement for the Flexible Optical Transparent Films,” The 35th National Conference on Theoretical and Applied Mechanics, Tainan, Taiwan, Nov. 18-19, 2011.(Excellent-work Paper Award of The 35th National Conference on Theoretical and Applied Mechanics, 2011.)
  42. B.J. Wen, Y.Y. Lai, T.C. Tsai, M.T. Ke, C.Y. Chen, and T.S. Liu, “Visual Fatigue Difference Analysis between Reflective and Emissive Backlight of Electronic-Book Readers,” China Display/ Asia Display 2011, Kunshan, China, Nov. 7-9, 2011.
  43. Ming-Wei Chang, Hsuan-Kai Lin, Chin-Hsin Chiu, Chun-Han Li, Mao-Chi Lin, Bor-Jiunn Wen, and Chung-Shu Chang, “Properties of Patterned ITO Film on Plastic Substrate under Mechanical Bending for Flexible Display,” The International Union of Materials Research Societies International Conference in Asia (IUMRS-ICA), Taipei, Taiwan, Sep. 19-22, 2011.
  44. Yen-Liang Chen, Bor-Jiunn Wen, Shau-Wei Hsu, and Kuei-Neng Wu, “ A Method for Inspecting the Full-field Residual Stress with Large Area on a Flexible Indium Tin Oxide Film,” The 11th International Conference on New Developments and Applications in Optical Radiometry (NEWRAD 2011), Hawaii, USA, Sep. 19-23, 2011.
  45. Su-Chuion Liao and Bor-Jiunn Wen, “Color Shift Analysis of Reflective Flexible Display on Bending Conditions,” The 17th International Display Workshops, Fukuoka, Japan, Dec. 1-3, 2010.
  46. Yen-Liang Chen and Bor-Jiunn Wen, “Method for Testing the Durability of a Flexible Indium Tin Oxide Film,” 2010 The International Conference on Flexible and Printed Electronics, Hsinchu, Taiwan, Oct. 28-29, 2010.
  47. Bor-Jiunn Wen and Tzong-Shi Liu, “Bending-Characteristics Measurement of Flexible Electronics by Using Fast Optimal Sliding Mode Control Method,” SICE Annual Conference 2010, Taipei, Taiwan, Aug. 18-21, 2010.
  48. Su-Chuion Liao, Cheng-Hsien Chen, and Bor-Jiunn Wen, “A Study of Ambient Light Source for Automatic Optical-characteristics measurement for Flexible Display,” 2009 Taiwan AOI Forum, Show and Contest, Taipei, Taiwan, Nov. 5, 2009.
  49. Bor-Jiunn Wen, Tzong-Shi Liu, Cheng-Hsien Chen, Hsin-Yi Ko, Zong-Ying Chung, and Su-Chuion Liao, “A Study of Automatic Measurement of Optical Characteristics for Flexible Display in Bending,” 2009 Taiwan AOI Forum, Show and Contest, Taipei, Taiwan, Nov. 5, 2009.
  50. Bor-Jiunn Wen, Tzong-Shi Liu, Cheng-Hsien Chen, Hsin-Yi Ko, Zong-Ying Chung, and Su-Chuion Liao, “Optical-Characteristics Measurement of Flexible Display for Reliability Test,” SID 09 DIGEST, San Antonio, Texas, June 2-4, 2009.
  51. Tze-An Liu, Bor-Jiunn Wen, and Jin-Long Peng, “Diagnosing Water Content in Wood by Terahertz Radiation,” International Conference on Laser Applications in Life Sciences, Taipei, Taiwan, Dec. 4-6, 2008.
  52. Bor-Jiunn Wen, Tzong-Shi Liu, Cheng-Hsien Chen, Hsin-Yi Ko, and Zong-Ying Chung, “Flexible-Characteristics Inspection System for Measuring Bended Characteristics of Flexible Electronics,” 2008 International Symposium on Flexible Electronics and Displays, Hsinchu, Taiwan, Nov. 13-14, 2008.
  53. Bor-Jiunn Wen, Yung-Chiang Chung , and Tzong-Shi Liu. “Microfluidic Manipulation in Biochip System,” 2008 Dynamic Systems and Control Conference, Michigan League, Ann Arbor, Michigan, Oct. 20-22, 2008.
  54. Bor-Jiunn Wen, Tzong-Shi Liu, Cheng-Hsien Chen, Hsin-Yi Ko, and Zong-Ying Chung, “Measurement Method for Optical Characteristics of Flexible Vehicle Display,” SID VEHICLES AND PHOTONS 2008, Fairlane Center, University of Michigan at Dearborn, MI, Oct. 16-17, 2008.
  55. Shu-Fei Tsai, Guo-Wei Lee, Hsin-Yi Ko, Bor-Jiunn Wen, and S.-Y. Wang,“Developments of Infrared Radiation Thermometers for the Temperature Standards,” 10th International Symposium on Temperature and Thermal Measurements in Industry and Science, the Chateau Lake Louise, Canada, May 21-25, 2007.
  56. Hsin-Yi, Ko, Bor-Jiunn Wen, Shu-Fei Tsai, and Guo-Wei Lee, “A High Emissivity Blackbody with Large Aperture for Radiometric Calibration at Low Temperature,” 10th International Symposium on Temperature and Thermal Measurements in Industry and Science, the Chateau Lake Louise, Canada, May 21-25, 2007.
  57. Shu-Fei Tsai, Hsin-Yi, Ko, and Bor-Jiunn Wen, “Standard Blackbody for Infrared Tympanic Thermometers,” the 2006 metrology symposium, Centro Nacional De Metrologia, Mexico, October 25–27, 2006.
  58. Mang Ou-Yang, Shi-Wen Huang, Shu-Fei Tsai, Hsin-Yi,Ko, and Bor-Jiunn Wen, “Macromodel of Electro-Thermal Feedback for Nonlinear Microbolometers,” 6th International Conference Numerical Simulation of Optoelectronic Devices, Nanyang Technological University, Singapore, September 11-14, 2006.
  59. Bor-Jiunn Wen and Yung-Chiang Chung , “Robust Fuzzy Sliding-Mode Control for Microfluidic Manipulation,” The 10th conference on Artificial Intelligence and Applications, National University of Kaohsiung, Kaohsiung, Taiwan, December 2-3, 2005.
  60. B. J. Wen, H. M. Tai, and F. S. S. Chien, “Nano Patterning and Nano Molding on the Nitride Films System,” The 4th Internal Symposium of Surface Science and Nanotechnology, Omiya, SonicCity, Saitama, Japan, November 14-17, 2005.
  61. B. J. Wen, H. M. Tai, and F. S. S. Chien, “Nano Patterning on Metallic Nitride Films,” Taiwan Nano Tech 2005, Taipei International Convention center, Taipei, Taiwan, September 21-23, 2005.
  62. Cheng-Chih Hsu, Bor-Jiunn Wen, and et al., “Study of the Diabetic Examination with the Small Concentration Variation of the Chiral Medium in Human Body Fluids,” 2004 Conference of The Optical Engineering Society of the Republic China, National Central University, Jhongli City, Taoyuan County, Taiwan, December, 2004.
  63. Chung Yung-Chiang, Bor-Jiunn Wen, et al., “Optimal Fuzzy Sliding-Mode Control for Biofluidic Manipulation on Biochip by using Microcontroller,” ITRI Biotechnology Forum, Hsinchu, Taiwan, November, 2004.
  64. B. J. Wen, F. S.-S. Chien, H. M. Tai, and P. C. Kuo, ”Kinetic Study of Nano Patterning on Metallic Nitride Films,” The 2nd International Symposium on Nanomanufacturing, KAIST, Daejeon, Korea, November 3-5, 2004.
  65. Y. C. Chung and B. J. Wen, “Optimal Fuzzy Sliding-Mode Control for Microcontroller-based Microfluidic Manipulation in Biochip System,” 2004 International Conference on Control, Automation and Systems, Bangkok, Thailand, August 25-27, 2004.
  66. Forest Shih-Sen Chien, H. M. Tai, P. C. Kuo, and B. J. Wen, “Kinetics of Local Oxidation on Metal Nitrides Thin Film with Proximal Probes,” The 3rd Cross-Strait Workshop on Nano Science and Technology, Hualien, Taiwan, April, 2004.
  67. T. S. Liu and B. J. Wen, “Nanoparticle Manipulation Using Atomic Force Microscope and X-Y Stage,” International Conference on Control, Automation, and Systems, pp.1542-1546, Gyeongju, Korea, 2003.
  68. B. J. Wen, J. M. Wang, Y. H. Thung, C-C. A. Chen, and Y. T. Wang, “Research on Injection Mold Form Accuracy for Optical Lens Mold,” Asian Mold Conference, Taiwan, July, 2001.

 Other Publications

  1. Tzeng-Yow Lin, Bor-Jiunn Wen, Hsiu-Ju Tsai, and Wen-Chun Liu, “Optical-Property Measurement of Electronic Paper Displays,” Handbook of Visual Display Technology, Janglin Chen (editor), Springer, 2016. (ISBN 978-3-642-35947-7).
  2. Tzeng-Yow Lin, Bor-Jiunn Wen, Hsiu-Ju Tsai, and Wen-Chun Liu, “Color-Property Measurement of Electronic Paper Displays,” Handbook of Visual Display Technology, Janglin Chen (editor), Springer, 2015. (ISBN 978-3-642-35947-7).
  3. Bor-Jiunn Wen, “Gloss Meter, Illuminance Meter, Luminance Meter, Reflectance Standards, and Standard Measurement Geometries,” Metrology: Concepts and Devices, Encyclopedia of Color Science and Technology, Ronnier Luo (editor), Springer, 2015. (ISBN 978-3-642-27851-8).
  4. Bor-Jiunn Wen, A Study of Flexibility-Characteristics Measurement for Flexible Displays, PhD dissertation, National Chiao Tung University, Hsinchu, Taiwan, R.O.C. , 2012. Advisor: Prof. Tzong–Shi Liu 呂宗熙教授(2013第三屆上銀優秀機械博士論文獎－佳作) (兩岸四地：15/132篇)
  5. Bor-Jiunn Wen, “A Biomedical Application by Using Optimal Fuzzy Sliding-mode Control,” Sliding Mode Control, Ivana Lorkovic (editor), InTech, 2011. (ISBN 978-953-307-1093-8).
  6. Bor-Jiunn Wen, Sliding-Mode Control for Nanoparticle Manipulation Using an Atomic Force Microscopy, Master thesis, National Chiao Tung University, Hsinchu, Taiwan, R.O.C., 2003. Advisor: Prof. Tzong–Shi Liu 呂宗熙教授

 Patents

  1. 溫博浚、高嘉宏、林永昇，「輔助搬運方法」，中華民國專利公告號I698235，2020.7.11。
  2. 溫博浚、陳彥良，「可調制面型共光程干涉量測裝置」，中華民國專利公告號I476391，2015.03.11。
  3. 溫博浚、陳彥良，「光学测量装置」，中國大陸專利公告號ZL201210421089.X，2015.01.21。 
  4. 彭保仁、陳政憲、柯心怡、溫博浚，「熱影像缺陷量測裝置」，中華民國專利公告號I426263，2014.03.03。 
  5. Bor-Jiunn Wen, Hsin-Da Yeh, Cheng-Hsien Chen, Hsin-Yi Ko, and Zong-Ying Chung, “Inspection method and system of bending-force and electric characteristics for flexible unit,” US7,882,748, Mar. 8, 2011.
  6. 溫博浚、業欣達、陳政憲、柯心怡、鍾宗穎，「可检测挠曲力量与电性的夹具」，中國大陸專利公告號ZL200810181063.6，2013.01.31。 
  7. 溫博浚、業欣達、陳政憲、柯心怡、鍾宗穎，「軟性元件之撓曲力量和電性檢測方法與裝置」，中華民國專利公告號I377343，2012.12.03。 
  8. 溫博浚、陳政憲、柯心怡、鍾宗穎，「软性组件的挠曲装置」，中國大陸專利公告號ZL200810211479.8，2011.05.04。
  9. 溫博浚、陳政憲、柯心怡、鍾宗穎，「軟性元件之撓曲檢測平台的撓曲驅動方法與裝置」，中華民國專利公告號I367324，2012.07.18。 
  10. Bor-Jiunn Wen, Cheng-Hsien Chen, Zong-Ying Chung, Hsin-Yi Ko, and, Huang Ming Chieh, “Inspection system for flexible character of flexible device,” US7,971,492, Oct. 3, 2011.
  11. 溫博浚、陳政憲、鍾宗穎、柯心怡、黃銘杰，「软性元件挠曲特性的检测方法及其系统」，中國大陸專利公告號ZL200810099009.7，2012.07.16。 
  12. 溫博浚、陳政憲、鍾宗穎、柯心怡、黃銘杰，「軟性元件的撓曲特性檢測方法與裝置」，中華民國專利公告號I370248，2012.08.21。 
  13. Bor-Jiunn Wen and Hsin-Yi Ko, “Preventive device of thermal convection for radiation standard source,” US7,838,802, Jan. 31, 2011.
  14. 溫博浚、柯心怡，「具防止热对流机制的辐射标准装置」，中國大陸專利公告號ZL200710199057.9，2010.12.07。 
  15. 溫博浚、柯心怡，「輻射標準源之防止熱對流裝置」，中華民國專利公告號I346199，2011.10.03。 
  16. 柯心怡、溫博浚、蔡淑妃、李國威，「陣列式輻射標準源」，中華民國專利公告號I311193，2009.07.07。 
  17. 吳乾埼、翁漢甫、許正治、王振宇、溫博浚，「零阿贝误差测量系统及其方法」，中國大陸專利公告號ZL200510137450.6，2011.01.31。 
  18. 吳乾埼、翁漢甫、許正治、王振宇、溫博浚，「零阿貝誤差量測方法」，中華民國專利公告號I267622，2007.01.01。 
  19. 許正治、吳乾埼、陳朝榮、王振宇、溫博浚、翁漢甫，「准共光程外差干涉位移测量系统」，中國大陸專利公告號ZL200510132985.4，2010.06.04。 
  20. 許正治、吳乾埼、陳朝榮、王振宇、溫博浚、翁漢甫，「準共光程外差干涉面內位移量測系統」，中華民國專利公告號I270663，2007.02.02。

 Award

  1. 指導大學部專題生陳睿宇參加111年度國立臺灣海洋大學「大學生暑期學習實務體驗計畫」-無人飛行器之垃圾感測與追蹤研究，榮獲工學院佳作獎。(2022/11/20)
  2. 指導大學部專題生黃致軒與黃裕盛榮獲2022第21屆非破壞檢測技術研討會－海報競賽佳作獎，「影像光流法於人體生理訊號感測研究」，2022。
  3. 指導大學部專題生黃裕盛、黃致軒參加國立台灣海洋大學機械與機電工程學系之「專題研究」競賽-影像光流法於人體生理訊號感測研究，榮獲佳作。(2022/10/13)
  4. 指導大學部專題生黃熹炫、陳睿宇參加國立台灣海洋大學機械與機電工程學系之「專題研究」競賽-速度控制於無人車功率分析研究，榮獲佳作。(2022/10/13)
  5. 指導大學部黃裕盛獲得科技部補助111學年大專學生研究計畫，「利用光流演算法於生理資訊之疲勞度分析」(111-2813-C-019-035-E)，2022。
  6. 指導大學部汪洲、何文閎、黃文劭同學榮獲基隆市政府舉辦「基隆黑客松 (Keelung Hackathon) ：如果我是超北市長，首都圈大數據策略競賽」之「大數據規劃應用獎」。(2022/1/15)
  7. 國立臺灣海洋大學109學年校級教學優良教師
  8. 指導大學部專題生黃國鑫參加國立台灣海洋大學機械與機電工程學系之「專題研究」競賽-無人船舶於水域污染探測與改善研究，榮獲第一名。(2021/10/14)
  9. 指導大學部專題生藍浚瑋、鄭亦宸、張哲睿參加國立台灣海洋大學機械與機電工程學系之「專題研究」競賽-利用影像深度學習演算法於棒球運動軌跡分析研究，榮獲第一名。(2020/10/15)
  10. 指導大學部專題生周政宇、陳奇松、史覲瑄參加國立台灣海洋大學機械與機電工程學系之「專題研究」競賽-無人船舶視覺感測與控制之海面垃圾清除，榮獲第二名。(2020/10/15)
  11. 國立臺灣海洋大學108學年度工學院優良導師。
  12. 指導大學部專題生張哲睿、姚元鎧、蔡欣憫參加第四屆(2019)北區跨校機械(電)工程學系MechaHeroes專題製作競賽-雙機械手臂之互動追蹤定位研究，榮獲佳作獎。(2019/12/20)
  13. 指導大學部專題生張哲睿、姚元鎧、蔡欣憫參加國立台灣海洋大學機械與機電工程學系之「專題研究」競賽-雙機械手臂之互動追蹤定位研究，榮獲第二名。(2019/10/3)
  14. 指導大學部專題生杜星旻、謝承展參加國立台灣海洋大學機械與機電工程學系之「專題研究」競賽-機電系統之智慧雲端遠距診斷研究，榮獲第三名。(2019/10/3)
  15. 指導博士班研究生黃柏翰榮獲The 2nd Joint Symposium on Advanced Mechanical Science & Technology－傑出海報論文獎，「Facial Image Emotion Recognition by Neural Networks based on Histogram of Oriented Gradients」，2018。
  16. 指導研究生黃仕安與許睿仁榮獲中華民國力學學會第42屆全國力學會議－海報競賽－佳作，「軟性多層模基板介面應力之自動化光學檢測研究」，2018。
  17. 指導大學部專題生葉哲志、林聖鈞參加107年度國立臺灣海洋大學高等教育深耕之計畫「大學生暑期實務體驗計畫」-穿戴式動力輔助裝置，榮獲工學院第一名。(2018/10/23)
  18. 指導大學部專題生葉哲志、林聖鈞、熊冠凱參加國立台灣海洋大學機械與機電工程學系之「專題研究」競賽-穿戴式動力輔助裝置，榮獲第一名。(2018/10/4)
  19. 指導大學部專題生葉哲志、朱晏辰、林維則參加國立台灣海洋大學機械與機電工程學系之「專題研究」競賽-腦波控制之穿戴式智慧農務系統，榮獲佳作。(2018/10/4)
  20. 指導大學部專題生吳秉謙、曾柏軒、黃俊翰參加國立台灣海洋大學機械與機電工程學系之「專題研究」競賽-影像感測之互動式機械人室內人體追蹤研究，榮獲實作組第二名。(2017/10/5)
  21. 指導大學部專題生陳銘章、鍾宇冠參加國立台灣海洋大學機械與機電工程學系之「專題研究」競賽-機械視覺情緒感測與分析，榮獲實作組第三名。(2017/10/5)
  22. 指導大學部陳銘章獲得科技部補助106學年大專學生研究計畫，「互動式機械人之視覺情緒感測與分析」(106-2813-C-019-016-E)，2017。
  23. 指導大學部專題生呂彥槿、陳駿睿參加2015-2016裕隆日產汽車創新風雲賞，「車用透明顯示器之視覺互動操控應用」，榮獲優選獎。(2016/11/16)
  24. 指導大學部專題生李憲昌、卜啟軒、楊嘉文參加國立台灣海洋大學機械與機電工程學系之「專題研究」競賽-水果之自動化影像視覺熱量分析研究，榮獲實作組第二名。(2016/9/29)
  25. 指導大學部徐愷辰獲得科技部補助105學年大專學生研究計畫，「機械手臂之動態視覺模糊控制定位研究」(105-2815-C-019-005-E)，2016。
  26. 指導大學部專題生薛皓云參加國立台灣海洋大學機械與機電工程學系之「專題研究」競賽-利用自動化視覺量測技術於水果之熱量分析，榮獲實作組第一名。(2015/9/24)
  27. 2013第三屆上銀優秀機械博士論文獎－佳作，「A Study of Flexibility-Characteristics Measurement for Flexible Displays」，2013。
  28. 2013 Taiwan AOI Forum & Show－優秀論文海報獎第三名，「A Method of Breaking Reliability Test for Flexible Displays」，2013。
  29. 工研院102年－年度論文獎，「Edge Contrast Failure Analysis on Vision Angle of Human Eyes for Curve Displays」，2013。
  30. 2012國際創新設計研討會最佳論文獎，「The Research of Visual Performance with Color Electronic-paper Display」，2012。
  31. 中華民國力學學會100學年度學生論文獎－固力材料(含設計製造)組－佳作，「Full-Field Deflection Measurement for the Flexible Optical Transparent Films」，2011。
  32. 2010年第七屆工研院品質典範案例－知識型服務暨技術衍生加值類之國家溫度計量標準之維持－佳作，2010。