跳到主要內容區
  1. 首頁
  2. 系所成員
  3. 師資陣容
  4. 專任師資
  5. 閻順昌

閻順昌

姓名職稱 閻順昌 教授 閻順昌
研究室 機械系館A棟315室
電　話 (02) 2462 2192 ext. 3215
傳　真 (02) 2462-0836
E-mail scyen@mail.ntou.edu.tw
學　歷 國立台灣科技大學機械工程博士
經　歷 國立台灣海洋大學機械與機電工程學系教授 (2012-迄今)
國立台灣海洋大學機械與機電工程學系教授兼系主任 (2017-2020)
國立台灣海洋大學機械與機電工程學系副教授 (2007-2012)
國立台灣海洋大學機械與機電工程學系助理教授 (2003-2007)
空軍軍官學校航空機械工程學系講師 (1998-2003)
空軍軍官學校航空太空工程學系助教 (1993-1996)
教學服務 國立臺灣海洋大學教學優良 (2017)
國立臺灣海洋大學工學院優良導師 (2015)
研究領域 實驗流體力學、燃燒學、空氣動力學
實驗室 流力實驗室-MEA313 Tel: 02-2462-2192 Ext 3234
教學課程 研究所：高等流體力學
大學部：流體力學、熱力學、流體機械
著　作 研究計畫　│Refereed Papers　│ Conference Papers　│ Books/Reports　│ Curriculum Vitae


 研究計畫

  1. "以主、被動流控制方式調制風機葉片的設計與應用 (II)"，科技部109年度計畫。
  2. "空氣系統水下艙室內配置最佳化研發"，科技部108年度計畫。
  3. "以主、被動流控制方式調制風機葉片的設計與應用"，科技部108年度計畫。
  4. "改善彎角管道效能以受隆突體調控阻塞比的設計"，科技部107年度計畫。
  5. "新式鈍體提升非預混火焰溫度均勻性及燃燒效率之分析 (II)"，科技部106年度計畫。
  6. "新式鈍體提升非預混火焰溫度均勻性及燃燒效率之分析"，科技部105年度計畫。
  7. "以曲翼型導葉片改善彎角管道效能的設計"，科技部104年度計畫。
  8. "S809翼型群組風機受不同幾何配置的流場行為"，科技部103年度計畫。
  9. "並行翼葉片流場特性應用於群組風機之效能提升"，科技部102年度計畫。
  10. "烘手機空氣流道之研究"，和光工業股份有限公司103年度計畫。
  11. "新型烘手機之流道改善與噪音控制"，科技部102年度計畫。
  12. "烘手機空氣流道之研究"，和光工業股份有限公司102年度計畫。
  13. "多級數轉子、不同間隙葉片及其受膛線調控之流場分析並應用於風機效能提升"，科技部101年度計畫。
  14. "新式非預混雙旋流燃燒噴嘴設計與分析 (3/3)"，科技部100年度計畫。
  15. "新式非預混雙旋流燃燒噴嘴設計與分析 (2/3)"，科技部99年度計畫。
  16. "新式非預混雙旋流燃燒噴嘴設計與分析 (1/3)"，科技部98年度計畫。
  17. "以主、被動流動控制方式調制鈍體流場特性及應用: 調控桿、柵欄激擾、脈動泵及聲音波激擾"，科技部97年度計畫。
  18. "以主、被動流動控制方式調制不同掠角機翼的表面流場與提高氣動力性能"，科技部96年度計畫。
  19. "前掠翼機翼的流場特性對氣動力性能及渦漩流逸影響之研究"，科技部95年度計畫。
  20. "不同後掠角對機翼流場特性、氣動力性能及尾流區非穩態結構的研究"，科技部94年度計畫。
  21. "以膛線化噴嘴改善燃燒效率及碳氫化合物污染的應用"，科技部94年度計畫。

 Refereed Papers

  1. Yen, S. C., Ye, C. E., and San, K. C., 2021, “Effects of Starlike Control Discs on Flow Structures and Combustion Capability,” Energy, Accepted. (SCI, IF: 6.082, THERMODYNAMICS: 3/61). MOST 105-2221-E-019-038.
  2. Yen, S. C., Liu, W. S., San, K. C., and Wang, W. F., 2021, “Design of Wind-Turbine Blades for Improving Aerodynamic Performance Using Hybrid Blades,” Ocean Engineering, Accepted. (SCI, IF: 3.068, ENGINEERING, MARINE: 1/14). MOST 109-2221-E-019-039.
  3. Yen, S. C., Shih, C. L., and San, K. C., 2018, "Non-Premixed Flame Characteristics and Exhaust Gas Concentrations behind Rifled Bluff-Body Cones," Journal of the Energy Institute, Vol. 91, Issue 4, pp. 489–501. (SCI, IF: 4.748, ENERGY & FUELS: 33/112). 
  4. Yen, S. C., Huang, J. X., and San, K. C., 2017, "Wind Farm Characteristics of Side-by-Side and Tandem Configurations," Ocean Engineering, Vol. 137, Issue June, pp. 89–98. (SCI, IF: 3.068, ENGINEERING, MARINE: 1/14). MOST 103-2221-E-019-027. 
  5. Yen, S. C., Wu, C. H., and San, K. C., 2017, "Characteristics of Flow Configurations around Side-by-Side Twin Wind Blades," Experimental Thermal and Fluid Science, Vol. 82, pp. 302–313. (SCI, IF: 3.204 ENGINEERING, MECHANICAL: 18/128). NSC 102-2221-E-019-018.
  6. Yen, S. C., Wu, S. F., and San, K. C., 2016, "Modulation of Wake Flow and Aerodynamic Behaviors around a Square Cylinder Using an Upstream Control Bar," Experimental Thermal and Fluid Science, Vol. 70, pp. 139–147. (SCI, IF: 3.204, ENGINEERING, MECHANICAL: 18/128). NSC 97-2221-E-019-03.
  7. Yen, S. C., Huang, Y. Z., and San, K. C., 2015, "Thermal Characteristics and Exhaust-gas Analysis behind Bluff-Body Frustums," Fuel, Vol. 159, Issue 1 November, pp. 519-529. (SCI, IF: 4.908, ENGINEERING, CHEMICAL: 13/137). NSC 98-2221-E-019-040-MY3.
  8. San, K. C., Lin, Y. Z., and Yen, S. C., 2014, “Effects of Sweep Angles and Angles of Attack on Junction-Flow Patterns,” Journal of Marine Science and Technology, Vol. 22, No. 2, pp. 204-210. (SCI)
  9. San, K. C., Hung, S. C., and Yen, S. C., 2014, “Flow Patterns, Turbulence Intensity and Aerodynamic Performances of Two Tandem Blades,” IMechE—Part G, Journal of Aerospace Engineering (Institution of Mechanical Engineers), Vol. 228, No. 7, pp. 1114-1129. (SCI)
  10. San, K. C., Shih, C. L., and Yen, S. C., 2014, “Cold-Flow Patterns behind Novel Rifled Bluff-Body Cones,” Journal of Mechanical Science and Technology, Vol. 28, No. 3, pp. 887-894. (SCI)
  11. Yen S. C., San, K. C., and Lin, Y. Z., 2013, “Influences of Upstream Floor Roughness and Aerodynamic Parameters on Swept-Wing Junction Flow,” Experimental Thermal and Fluid Science, Vol. 45, Issue February, pp. 16–24. (SCI)
  12. Yen, S. C. and Shih, C. L., 2013, “Improving Combustion Intensity and Modulating Flame Behaviors using Helical-Grooved Cones,” Journal of Mechanics, Vol. 29, Issue 02, pp 273–280. (SCI)
  13. San, K. C., Huang, Y. Z., and Yen, S. C., 2013, “Flame Patterns and Combustion Intensity behind Rifled Bluff-Body Frustums,” ASME Journal of Engineering for Gas Turbines and Power (American Society of Mechanical Engineering), Vol. 135, No. 12, pp. 121502. (SCI)
  14. San, K. C., Huang, Y. Z., and Yen, S. C., 2013, “Cold-Flow Patterns and Mixing Index behind/near Rifled Bluff-Body Frustums,” Journal of Visualization, Vol. 16, No. 3, pp 229-246. (SCI)
  15. San, K. C., Hsu, H. J., and Yen S. C., 2013, “Flame Structure and Combustion Capability of Non-Premixed Rifled Nozzles,” ASME Journal of Engineering for Gas Turbines and Power (American Society of Mechanical Engineering), Vol. 135, No. 7, pp. 071501. (SCI)
  16. Yen, S. C. and Yang, C. W., 2012, “Characteristic Flow Field behind a Square-Cylinder using Upstream Mesh Fences,” ASME Journal of Fluids Engineering (American Society of Mechanical Engineering), Vol. 134, No. 9, pp. 091202_1-9. (SCI)
  17. Yen, S. C. and Wu, S. F., 2012, “Square-Cylinder Flow Characteristics Using an Upstream Control Rod,” Journal of Mechanics, Vol. 28, No. 2, pp. 279-289. (SCI)
  18. Yen, S. C. and Liu, C. T., 2011, “Gap-Flow Patterns behind Twin-Cylinders at Low Reynolds Number,” Journal of Mechanical Science and Technology, Vol. 25, No. 11, pp. 1–9. (SCI)
  19. Yen, S. C. and Fei, Y. F., 2011, “Winglet Dihedral Effect on Flow Behavior and Aerodynamic Performance of NACA0012 Wings,” ASME Journal of Fluids Engineering (American Society of Mechanical Engineering), Vol. 133, No. 7, pp. 071302_1–9. (SCI)
  20. Yen, S. C. and Huang, L. -C., 2011, “Reynolds Number Effects on Flow Characteristics and Aerodynamic Performances of a Swept-Back Wing,” Aerospace Science and Technology, Vol. 15, No. 3, pp. 155–164. (SCI)
  21. Yen, S. C. and Liu, J. H., 2011, “Wake Flow behind Two Side-by-Side Square Cylinders,” International Journal of Heat and Fluid Flow, Vol. 32, No. 1, pp. 41–51. (SCI)
  22. Yen, S. C. and Yang, C. W., 2011, “Flow Patterns and Vortex Shedding Behavior behind a Square Cylinder,” Journal of Wind Engineering and Industrial Aerodynamics, Vol. 99, No. 7, 2011, pp. 868–878. (SCI)
  23. Yen, S. C., 2011, “Aerodynamic Performance and Shedding Characteristics on a Swept-Back Wing,” Journal of Marine Science and Technology, Vol. 19, No. 2, pp. 162-167. (SCI)
  24. Huang, R. F., Lin, B. H., and Yen, S. C., 2010, “Topological Flow Patterns and Their Effects on Surface Pressure Distributions and Vortex Shedding of a Square Cylinder in Crossflow at Incidence,” Journal of Fluid and Structures, Vol. 26, pp. 406–429. (SCI)
  25. Yen, S. C. and Huang, L.-C., 2009, “Flow Patterns and Aerodynamic Performance of Unswept and Swept-Back Wings,” ASME Journal of Fluids Engineering (American Society of Mechanical Engineering), Vol. 131, No. 11, pp. 111101-10. (SCI)
  26. Yen, S. C., San, K. C., and Chuang, T. H., 2008, "Interactions of Tandem Square Cylinders at Low Reynolds Numbers," Experimental Thermal and Fluid Science, Vol. 32, No. 4, pp. 927-938. (SCI)
  27. Huang, R. F and Yen, S. C., 2008, "Aerodynamic Characteristics and Thermal Structure of Nonpremixed Reacting Swirling Wakes at Low Reynolds Numbers," Combustion and Flame, Vol. 155, No. 4, pp. 539-556. (SCI)
  28. Yen, S. C. and Hsu, C. M., 2007, "Influence of Boundary Layer Behavior on Aerodynamic Coefficients of a Swept-Back Wing," ASME Journal of Fluids Engineering (American Society of Mechanical Engineering), Vol. 129, No. 6, pp. 674-681. (SCI, EI)
  29. Yen, S. C. and Hsu, C. M., 2007, "Flow Patterns and Wake Structure of a Swept-Back Wing," AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 45, No. 1, pp. 228-236. (SCI, EI)
  30. Yen, S. C. and Hsu, C. M., 2007, "Investigation on Vortex Shedding of a Swept-Back Wing," Journal of Experimental Thermal and Fluid Science, Vol. 31, No. 8, pp. 849-855. (SCI, EI)
  31. Yen, S. C. and Liu, J. H., 2007, "PIV Measurements of Exit Flow Field of Centrifugal Fans with Conditional Sampling," Journal of Marine Science and Technology, Vol. 15, No. 3, pp. 232-240. (SCI,EI)
  32. Yen, S. C. and Lin, K. T., 2006, "Exit Flow Field and Performance of Axial Flow Fans," ASME Journal of Fluids Engineering (American Society of Mechanical Engineering), Vol. 128, No. 2, pp. 332-340. (SCI, EI)
  33. Yen, S. C. and Huang, R. F., 2003, "Flow Control on Swirling Jets Using a Dual-Disc Blockage," Journal of the Chinese Institute of Engineers, Vol. 26, No. 7, pp. 435-442. (SCI, EI)
  34. Huang, R. F. and Yen, S. C., 2003, "Axisymmetric Swirling Vortical Wakes Modulated by a Control Disc," AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 41, No. 5, pp. 888-896. (SCI, EI)
  35. Huang, R. F., Yen, S. C., Huang, C. Y., Wu, J. Y., and Chen, R. C., 1999, "PIV measurements of vortex evolution on an impulsively started wing," Journal of Flow Visualization and Image Processing, Vol. 6, No. 1, pp. 1-17. (EI)


 Conference Papers

  1. 閻順昌, 2020, “以主、被動流控制方式調制風機葉片的設計與應用," 第三十七屆中國機械工程研討會 (2020 行政院科技部專題研究計畫熱流學門成果發表會)，雲林，國立虎尾科技大學。(2020, 11, 20-21)。
  2. Yen, S. C., Huang, S. C., and San, K. C., 2019, “Velocity Profiles and Reynolds Stress of Two Tandem Blade-Wind Turbines,” The 2019 International Conference on Mechatronic, Automobile, and Environment Engineering, Paper number: 2060, Shizuoka, Japan, 05-07 July, 2019.
  3. Yen, S. C., Ye, C. E., and San, K. C., 2018, “Astral-type Mechanisms on Combustion Performance and Decrease of Exhaust Gases,” The 11th World Bioenergy Congress and Expo, Paper number: Bioenergy-BE-02, Berlin, Germany, 02-04 July, 2018.
  4. Yen, S. C., Peng, Y. L., and San, K. C., 2017, "Design of a Porous Bluff-Body Disc on Improving the Gas-Mixing Efficiency," The 25th World Congress on Engineering (WCE 2017)‒ International Conference of Mechanical Engineering, Paper number: ICME_31, London, United Kingdom, 5-7 July, 2017.
  5. Yen, S. C., Shiha, S. L., and San, K. C., 2016, "Diffusion Flame Behaviors and Exhaust Gas Modulated using Rifled Taper Cones," The 4th Seoul International Conference on Applied Science and Engineering (SICASE 2016), Paper number: SICASE-1066, Seoul, South Korea, 5-7 July, 2016.
  6. Yen, S. C., Hung, S. C., and San, K. C., 2014, "Coupled Surface Oil Flow Patterns on Two Tandem Wing Blades", The 3rd Hong Kong International Conference on Engineering and Applied Science (2014 HKICEAS), Paper number: 201412-1114, Hong Kong, 29–31 December, 2014. 
  7. Yen, S. C., Kuo C. San, Yu-Fan Fei, and Sheng C. Hung, 2011. “Effects of Winglet Dihedral on Surface Flow Patterns”, The 11th International Conference on Fluid Control, Measurements and Visualization (FLUCOME 2011), Paper number: 113, Keelung, Taiwan, December 5–9, 2011. 
  8. Yen, S. C., and Hsu, H. J., 2008. “Thermal Structures and Combustion Efficiency of Non-Premixed Reacting Rifled Nozzles,” The 22th International Congress of Theoretical and Applied Mechanics (ICTAM2008), Paper number: ICTAM08ID 11743, Adelaide, Australia, August 24–29, 2008.
  9. Yen, S. C., and Liu, J. H., 2008, “Flow Structures of Side-by-Side Square Cylinders at Low Reynolds Numbers,” International Engineering Research Conference (IERC), Paper number 2D-1, Cebu City, Philippines, March 13–15, 2008.
  10. Yen, S. C., and Fei, Y. F., 2008, “Surface Flow and Aerodynamic Performance on a Swept-Forward Wing,” International Engineering Research Conference (IERC), Paper number 2D-9, Cebu City, Philippines, March 13–15, 2008.
  11. Yen, S. C. and Hsu, C. M., 2007, “Effects of Angle of Attack on a Swept-Back Wing,” The First Council of the European Aerospace Societies: European Air and Space Conference (CEAS 2007), Berlin, Germany, Paper number 720.
  12. 閻順昌, 黃隆奇, 黃榮芳, 2006,“低雷諾數時不同後掠翼之流場速度特性,”中國航空太空學會, 中壢, 論文編號: 01-09.
  13. Yen, S. C., Liu, C. T., and Wu, S. H., 2006, “Effects of Low Speed Flow on a Square Cylinder,” The Tenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-10), Bangkok, Thailand, Paper number WE-AU-0194.
  14. 閻順昌, 許清閔, 黃榮芳, 2005, “後掠翼之表面流場、氣動力性能與渦旋流逸研究,” 中國航空太空學會, 高雄, 論文編號: H-16.
  15. 閻順昌, 黃榮芳, 2005, “以雙圓盤控制器提升旋渦尾流的燃燒效率,” 中華民國燃燒研討會, 嘉義, 論文編號: C00001.
  16. 閻順昌, 黃榮芳, 2003, “雙圓盤控制器對旋噴流流場的調制效應,” 中國航空太空學會, 台南, 論文編號: A2. 
  17. Huang, R. F., Yen, S. C., and Wu, C. Y., 1999, “Vortex evolution on an impulsively started wing,” PSFVIP-2, Honolulu, U.S.A.
  18. Yen, S. C., Huang, C. Y., and Huang, R. F., 1998, “Evolution of surface vortices on an impulsively started wing,” 15th CSME Conference, Tainan, Taiwan. 


 Books / Reports

  1. 閻順昌, 2008, 以主、被動流動控制方式調制不同掠角機翼的表面流場與提高氣動力性能, 國科會專題研究計劃報告, NSC 96-2221-E-019 -006, 臺灣海洋大學機械與機電工程學系.
  2. 閻順昌,2007, 前掠翼機翼的流場特性對氣動力性能及渦漩流逸影響之研究, 國科會專題研究計劃報告, NSC 95-2221-E-019-016, 臺灣海洋大學機械與機電工程學系。
  3. 林國楨,閻順昌, 2006 , 20尺貨櫃在40尺平臺上不同安裝位置之貨車流場模擬分析, 機械工業雜誌, Vol. 274, pp 84-93 。
  4. 閻順昌, 2006, 以膛線化噴嘴改善燃燒效率及碳氫化合物污染的應用, 國科會專題研究計劃報告, NSC 94-2622-E-019-003-CC3, 臺灣海洋大學機械與機電工程學系。
  5. 閻順昌, 2006, 不同後掠角對機翼流場特性、氣動力性能及尾流區非穩態結構的研究, 國科會專題研究計劃精簡報告, NSC94-2212-E-019-006, 臺灣海洋大學機械與機電工程學系。