跳到主要內容區

林鎮洲

姓名職稱 林鎮洲 教授 林鎮洲
研究室 機械系館B棟227-1室
電 話 (02) 2462 2192 ext. 3211
傳 真 (02) 2462-0836
E-mail cclin@ntou.edu.tw
cclin578@gmail.com
學 歷 美國馬里蘭大學(UMCP)機械工程學系博士
美國馬里蘭大學機械工程學系碩士
國立成功大學機械工程系學士
經 歷 國立台灣海洋大學機械與機電工程學系教授
國立台灣海洋大學學務處副學務長(2009~2011)
國立台灣海洋大學機械與機電工程學系系主任(2005~2008)
研究領域 機構設計、海洋能源、機器人、產品創意設計、醫療輔具設計、水下技術
研究主題 海洋能源(波浪發電效率),智慧型機器人(視覺/觸覺引導自動化組裝、水下目標辨識),機構創新設計(水陸兩用車懸吊機構、步行輔助器、膝關節量測儀),機械運動學(並聯式機器人)
實驗室 智慧型機器人實驗室-B327 (分機3204)
水下作業系統實驗室-B126 (分機3262)
教學課程 研究所:機構設計、波浪與洋流能轉換分析
大學部:機動學、機械設計、機器人學、產品設計與開發、專利分析與創意設計、汽車學
著 作 研究計畫 │Refereed Papers │ Conference Papers │ Other Publications │ Patents


 研究計畫

  1. 底碇振盪衝擊式波浪能轉換器BH-OWSC 之設計與驗證-總計畫暨子計畫一:BH-OWSC電控PTO實驗系統之建構與輸出功率最大化控制,科技部107-108年度計畫。
  2. 浮式振盪水柱式波浪轉換系統實海域測試場址選擇與測試,科技部108-109年度產學合作計畫。(共同主持人)
  3. AI技術應用於智慧化養殖系統的建置(2/4),科技部108年度計畫。(共同主持人)
  4. "運用模型預測控制策略於擷取海洋波浪能",科技部106年度計畫。
  5. "岸基式OWC與推拉板結合之先期研究",科技部104年度計畫。
  6. "收折式懸吊機構功能與性能分析",財團法人船舶暨海洋產業研發中心104年度計畫。
  7. "收折式機構收折方式與裝備合作概念開發",財團法人船舶暨海洋產業研發中心103年度計畫。
  8. "高效率波浪能轉換器主機械系統之分析、設計與開發",科技部102年度計畫。
  9. "海洋能源科技人才培育資源中心",教育部102年度計畫。
  10. "膝關節旋轉鬆弛度量測儀之研發 - 用於內外翻與內外轉",科技部101年度計畫。
  11. "波浪能轉換技術與潛能區域評估研究(2/2)",科技部101年度計畫。
  12. "波浪能轉換技術與潛能區域評估研究(1/2)",科技部100年度計畫。

 Refereed Papers

  1. Yi-Chih Chow, Shiaw-Yih Tzang, Jiahn-Horng Chen, Chen-Chou Lin*, 2018, Inertial Effects on the Performance of a Bottom-Hinged Oscillating Wave Surge Converter, ASME Journal of Offshore Mechanics and Arctic Engineering, Vol. 141, 021902-1~021902-8. (SCIE). MOST 100-3113-E-019-001.
  2. Yi-Chih Chow, Yu-Chi Chang, Chen-Chou Lin, Jiahn-Horng Chen, Shiaw-Yih Tzang, (2018), Experimental Investigations on Wave Energy Capture of Two Bottom-Hinged-Flap WECs Operating in Tandem, Ocean Engineering, 164, 322-331. (SCIE IF= 2.214),  NSC 101-3113-E-019-001.
  3. Yi-Chih Chow, Yu-Chi Chang, Da-Wei Chen, Chen-Chou Lin, Shaiw-Yih Tzang, 2018, Parametric Design Methodology for Maximizing Energy Capture of a Bottom-Hinged Flap-Type WEC with Medium Wave Resources, Renewable Energy, 126, 605-616. (SCIE, IF 4.375) MOST 101-3113-E-019-002.
  4. 林鎮洲,侯昇基,張育齊,周一志,臧效義,2017,具可滑動底部轉軸-推拉板式波能轉換器之設計與實驗研究,中國造船暨輪機工程學刊,36(1), pp. 1-8,(EI).國科會:101-3113-E-019-001. 獲造船暨輪機工程師學會評選為107年度優秀論文.
  5. Yu-Chi Chang, Da-Wei Chen, Yi-Chih Chow, Shiaw-Yih Tzang, Chen-Chou Lin, and Jiahn-Horng Chen. (2015) Theoretical Analysis And SPH Simulation for The Wwave Energy Captured by a Bottom-Hinged OWSC. Journal of Marine Science and Technology, 23(6), pp. 901-908. (SCI). MOST 100-3113-E-019-001.
  6. Chen, D.-W., Tzang, S.-Y., Hsieh, C.-M., Chow, Y.-C., Chen, J.-H., Lin, C.-C. &Hwang, R.R., Numerical Modeling of Wave-induced Rotations of a Bottom-hinged Flapper with a SPH Model. Journal of Marine Science and Technology, Vol. 22, No. 3, pp. 372-380. (SCI) (2014).
  7. 張育齊,李耀輝,周一志,林鎮洲,臧效義,陳建宏,振盪衝擊式波能轉換器在捕獲係數上之機械阻抗效應。中國造船暨輪機工程學刊,33(4), pp.183-192。(EI)(2014)
  8. Chen-Chou Lin, A Knee Arthrometer for Measuring Varus, Valgus, and Rotation, Proceedings of 6th International Conference on Biomedical Engineering and Informatics (BMEI 2013), pp. 322-326, Hangzhou, China. (EI). (2013)
  9. 林鎮洲,”白浪滔滔放光明”,科學發展,第471期, 2012 /3, pp. 26-35.
  10. Lin, C. C., Ko, J. Y., Chen, C. H., and Chang, W. T., The Design and Preliminary Assessment of a New Knee Ligament Arthrometer, Proceedings of 4th International Conference on Biomedical Engineering and Informatics, Vol. 3, pp. 1180-1184. (2011)(EI)
  11. Chou, Y. C., Lin, C. C., Optimal Design of Flap Type Wave Energy Converter, Mechanical Engineering Magazine Monthly, Vol. 429, pp. 34-46. (2011).
  12. Lin, C. C., Ko, J. Y., Chen, C. H., and Chang, W. T., “The Design and Preliminary Assessment of a New Knee Ligament Arthrometer,” Proceedings of 4th International Conference on Biomedical Engineering and Informatics, Vol. 3, 2011, pp. 1174-1178. (EI)
  13. 周一志、林鎮洲,”推拉板式波浪能轉換器的最佳設計”,機械月刊,第37卷,第4期, 2011 /4, P.文34-46.
  14. Chang, W. T., Wu, L. I., Fu, K.H., and Lin, C. C., "Inspecting Profile Errors of Conjugate Disk Cams with Coordinate Measurement," ASME Transactions, J. Manuf. Sci. and Eng., vol. 130, 011009 (2008) (SCI)
  15. C. -c. Lin, C. -k. Chen, "The Displacement Analysis of Altmann Const-Velocity Shaft Coupling," Machine Design and Research, Vol. 24, pp. 314-316. (2008).
  16. Chang, W. T., Lin, C. C., and Wu, L. I., 2005, "A Note on Grashof's Theorem," Journal of Marine Science and Technology, Vol. 13, No. 4, pp. 239-248. (EI)
  17. C. C. Chang, C. C. Lin, J. H. Wang, and M. D. Jeng, 2004, "The Study of Remotely Teleoperated Robotic Manipulator System for Underwater Constructions," Engineering Science and Technology Bulletin, vol. 75, pp. 114-120. (in Chinese).
  18. Chang, W. T., Lin, C. C., and Lee, J.J., 2003, "Force Transmissibility Performance of Parallel Manipulators," Journal of Robotic Systems, Vol. 20, No. 11, pp. 659-670. (SCI)
  19. Lin, C. C., Chang, W. T., 2003, "The Force Transmissibility of Planar Multiloop Linkages," Journal of Mechanical Engineering Science, Proceedings of the Institution of Mechanical Engineers Part C, Vol. 217, No. 11, pp. 1259-1270. (SCI)
  20. Lee, J.J., Lin, C.C., and Chen, C.P., 2003, "Kinematic Analysis of Mechanisms with Rolling Pairs using Matrix Transformation Method," Journal of the Chinese Institute of Engineers, Vol. 26, No. 4, pp. 531-535. (SCI)
  21. Lin, C. C., and Chang, W. T., 2002, "The Force Transmissivity Index of Planar Linkage Mechanisms," Mechanism and Machine Theory, Vol. 37, No. 12, pp. 1465-1485. (SCI)
  22. Chen, C. P., Lee, J. J., Lin, C. C., 2001, "Application of Matrix Method on The Kinematic Analysis of Mechanisms with Holonomic Pairs," The Chinese Journal of Mechanics, Vol. 17, No. 2B, pp. 133-142. (EI)
  23. C. C. Chang, M. D. Jeng, J. H. Wang, C. C. Lin and S. H. Tseng, 2001, "Intelligent Underwater Robotic Manipulator System Technology Study and Implementation," Engineering Science and Technology Bulletin, vol. 56, pp. 45-50, 2001 (in Chinese).
  24. Chang, C.C., Wang, J.H., Jeng, M.D., Lin, C.C., and Chen, K.H., 2000, "The fabrication and characterization of PZT thin film acoustic devices for the application in underwater robotic systems,” Proceedings of the National Science Council, Part A: Physical Science and Engineering. Vol. 24, No. 4, pp. 287-292.(EI)
  25. Lin, C. C., Chen, R. C., and Li, T. L., 1999, "Experimental Determination of The Hydrodynamic Coefficients of an Underwater Manipulator," Journal of Robotic Systems, Vol. 16, No. 6, pp. 329-338. (SCI)
  26. Lin, C. C., 1998, "Complete Solution of The Five-Position Synthesis for Spherical Four-bar Mechanisms," Journal of Marine Science and Technology, Vol. 6, No. 1,pp. 17-27. (EI)
  27. Lin, C. C. and Tsai, L. W., 1993, “The Trajectory Analysis of Bevel Planetary Gear Trains,” ASME Transactions, Journal of Mechanical Design, Vol. 115, No. 1, pp. 164-170. (SCI)
  28. Tsai, L. W. and Lin, C. C., 1989, “The Creation of Non-fractionated, Two Degree-of-Freedom Epicyclic Gear Trains,” ASME Transactions, Journal of Mechanisms, Transmissions, and Automation in Design, Vol. 111, No. 4, pp. 524-529. (SCI)


 Conference Papers

  1. Duy Tong Nguyen, Yi-Chih Chow*, Jiahn-Horng Chen, Chen-Chou Lin*, 2019, Performance assessment of different RANS turbulence models in numerical simulations for BH-OWSC, Proceedings of The 13th European Wave and Tidal Energy Conference (EWTEC2019), Paper No. 1519, Naples, Italy.
  2. Chen-Chou Lin*, Yu-Yu Huang, 2019, The optimization of the flap geometry for maximizing wave energy capturing efficiency of a BH-OWSC, Proceedings of The 26th National Computational Fluid Dynamics Conference, M01103, Keelung, Taiwan.
  3. Chen-Chou Lin*, Yi-Chih Chow, Yu-Yu Huang, 2019, GEOMETRY OPTIMIZATION OF CYLINDRICAL FLAPS OF OSCILLATING WAVE SURGE CONVERTERS USING ARTIFICIAL NEURAL NETWORK MODELS, Proceedings of The 13th International Conference on Energy Sustainability (ES2019), Paper No. 3878, Bellevue, Washington, USA.
  4. Chen-Chou Lin*, Yi-Chih Chow, Shiaw-Yih Tzang, 2018, The Viscous Effect in Power Capture of Bottom-Hinged Oscillating Wave Surge Converters, Proceedings of The 4th Asian Wave and Tidal Energy Conference (AWTEC 2018), Paper No. 423, Taipei, Taiwan. MOST 106-2221-E-019-066.
  5. 李昭宏,林鎮洲*,波浪能轉換器整合模擬平台之建構,2018,第二十一屆全國機構與機器設計學術研討會論文集,Paper No. 69, 基隆市,臺灣。
  6. 張怡,卓大靖,林鎮洲*,2018,以影像結合慣性元件之整合導航系統,第二十一屆全國機構與機器設計學術研討會論文集,Paper No. 64, 基隆市,臺灣。
  7. Chen-Chou Lin, Yi-Chih Chow, Shiaw-Yih Tzang, Ching-Yen Chiou, Yu-Yu Huang, (2018), Numerical Study on The Goemetric and Inertial Parameters for Oscillating Wave Surge Converters, ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2018), Madrid, Spain.
  8. 邱清彥,林鎮洲,周一志,臧效義,(2017),幾何參數對振盪衝擊式波浪能轉換器之數值研究,中國機械工程學會第三十四屆全國學術研討會,台中市。
  9. 林鎮洲,楊欽全(2016年12月)。水陸兩用車懸吊系統收折機構之設計最佳化。中國機械工程學會第三十三屆全國學術研討會。
  10. 林鎮洲,陳冠毓(2016年12月)。以數值方法模擬具PTO之振盪衝擊式波能轉換器。中國機械工程學會第三十三屆全國學術研討會,新竹, 工業技術研究院。
  11. 林鎮洲,楊宗穎,周一志(2015年12月)。振盪水柱式波浪能轉換器之性能分析。中國機械工程學會第三十二屆全國學術研討會,國立高雄應用科技大學,高雄市。科技部:104-ET-E-019-006-ET。
  12. 林鎮洲,林修頤,鄭元良(2015年12月)。振盪衝擊式波浪能轉換器之效能分析。中國機械工程學會第三十二屆全國學術研討會,國立高雄應用科技大學,高雄市。科技部:102-2221-E-019-021。
  13. 林嘉偉,張育齊,周一志,林鎮洲(2015年11月)。推拉板式波能轉換器板體捕獲效能之數值模擬。第37屆海洋工程研討會,國立中興大學,台中市。科技部:104-ET-E-019-006-ET。
  14. 林鎮洲,李志中,曾柏桑(2015年10月)。可收折式懸吊機構之拓樸合成。第十八屆全國機構與機器設計學術研討會,國立臺灣科技大學 台灣,台北市。財團法人船舶暨海洋產業研發中心:SOIC-1012-T152(103S)。
  15. S.Y. Tzang, Y.L. Chen, T.W. Hsu, D.W. Chen, C.C. Wang, C.C. Lin . Numerical Assessment on Wave Energy Resources in Coastal Waters of Northeastern Taiwan. 33rd International Conference on Ocean, Offshore and Arctic Engineering (OMAE2014), San Francisco, USA. NSC 101-3113-E-019-002. (2014)
  16. 林鎮洲,謝承良,輪椅手搖車之運動分析與初步評估,17屆全國機構與機器設計學術研討會,台中市。(2014)
  17. J.C. Wang, C. C. Lin, 2013, Performance Analysis Based on The Characteristics of Hydraulic Cylinders of Flap Type Wave Energy Converters, Proceedings of The 30th CSME National Conference on Mechanical Engineering, Yi-Lan, Taiwan.
  18. C.J. Li, C.C. Wang, 2013, The Development of Double-Hinged Flap Type Wave Energy Converters,Proceedings of The 30th CSME National Conference on Mechanical Engineering, Yi-Lan, Taiwan.
  19. Yu-Chi Chang, Wei-Ming Huang, Yi-Chih Chow, Chen-Chou Lin, Shiaw-Yih Tzang, 2013, Experimental Investigations on Two Bottom-Hinged Wave Energy Converters in Tandem 
  20. Operations at Different Separation Distances, 10th European Wave and Tidal Energy Conference (EWTEC2013), Aalborg, Denmark.
  21. Da-Wei Chen, Neng-Yao Zeng*, Shiaw-Yih Tzang, Chih-Min Hsieh, Yi-Chih Chow, Chen-Chou Lin, Robert Rong-Jiann Hwang (2013, Oct). A Preliminary Investigation on Wave Induced Motions of a Double-hinged Flapper With the SPH Method. The 6th East Asia Workshop for Marine Environment and Energy, Qingdao, China.
  22. Yung-Lung Chen, Shiaw-Yih Tzang, Tai-Wen Hsu, Chen-Chou Lin and Chi-Chung Ho (2013, Oct). Evaluation on Wave Energy Assessment by Applying SWAN Model in Keelung Coastal Waters. The 6th East Asia Workshop for Marine Environment and Energy, Qingdao, China.
  23. Chen-Chou Lin (2013, Aug). A Knee Ligament Arthrometer System to Measure The Internal/External Rotation and Varus/Valgus Angulation . The 6th WACBE World Congress on Bioengineering, Beijing, China.
  24. C.-C. Lin, J.H. Chen, Y.C. Chow, S.Y. Tzang, S.J. Hou, F.Y. Wang (2012, Oct). The Experimental Investigation of The Influencing Parameters of Flap Type Wave Energy Converters. 4th International Conference on Ocean Energy (ICOE2012), Dublin, Ireland.
  25. Chen, D.-W., Tzang, S.-Y., Hsieh, C.-M., Chow, Y.-C., Chen, J.-H.,Lin, C.-C., Hwang, R.-R (2012, Jun). SPH Modeling of Wave-induced Rotations of a Bottom-hinged Flapper. National Symposium on System Science and Engineering, Keelung, Taiwan.
  26. Lin, C. C., Hou, S. J., Wang, J. C., Chou, Y. C., Tzang, S. Y., 2012, Design of Flap-type Wave Energy Converter with Sliding Bottom Hinge, Proceedings of The 29th CSME National Conference on Mechanical Engineering, Kaohsiung, Taiwan.
  27. Lin, C. C., Hsu, S. M., 2012, The Innovative Design of a New Knee Ligament Arthrometer, Proceedings of The 29th CSME National Conference on Mechanical Engineering, Kaohsiung, Taiwan.
  28. Lin, C. C., Ko, J. Y., Chen, C. H., and Chang, W. T., “The Design and Preliminary Assessment of a New Knee Ligament Arthrometer,” Proceedings of 2011 4th International Conference on Biomedical Engineering and Informatics, Vol. 3, 2011, pp. 1174-1178,Shanghai, China.
  29. 林鎮洲、陳志華、張文桐、柯雋彥、王裕德、許筱曼,2011,”膝關節穩定度量測儀之研發與創新設計”,2011生物醫學工程技術研討會暨國科會醫學工程學門成果發表會論文集,No. 031100614,成功大學,台南市.
  30. 林鎮洲、王裕德,2011,”穿戴式步行輔助器”,第十四屆全國機構與機器設計學術研討會論文集,L-004,中央大學,桃園中壢.
  31. 林鎮洲、劉俊宏,2011,”推拉板式波浪能轉換器之性能探討”,中國機械工程學會第二十八屆全國學術研討會論文集,A08-021,中興大學,台中市.
  32. C. C. Lin, J. S. Liou, 2010, "Dynamic Tracking of Underwater Object," Proceedings of The 27th CSME National Conference on Mechanical Engineering, BB13-016,台北科技大學,台北市
  33. Y. H. Lee, D. L. Wang, Y. C. Chang, Y. C. Chow, C. C. Lin, 2010, "Preliminary Experimental Investigation on the Kinematic Characteristics of Flap-Type Wave Energy Converter," Proceeding of The 32 Ocean Engineering Conference, pp. 837-842,海洋大學,基隆市.
  34. 林鎮洲,宋緯倫,2009,"桌球機器人系統之開發",中國機械工程學會第二十六屆全國學術研討會論文集,No. B16-022,成功大學,台南市.
  35. 林鎮洲,游竟人,2009,"運用接觸型態辨識架構於自動化插配作業",中國機械工程學會第二十六屆全國學術研討會論文集,No. B16-035,成功大學,台南市.
  36. 林鎮洲,林翰屏 ,2009,"基於機器學習與視覺技術之攻守型桌上曲棍球機器人 ",第十二屆全國機構與機器設計學術研討會論文集,I0083,中正大學,嘉義民雄.
  37. 林鎮洲,游竟人,劉家興,2009,"水下影像系統之目標物追蹤模組之研發(II)",第十一屆水下技術研討會論文集,pp. 425~432,台灣海洋大學,基隆市.
  38. C. -c. Lin, C. -k. Chen, 2008, "The Displacement Analysis of Altmann Const-Velocity Shaft Coupling," Proceedings of The 16th International Mechanisms and Machine Science Conference, China , CCMMS 2008, pp. 314-316 , DaLian, China..
  39. 林鎮洲,朱汶崧,2008,"運用隱藏式馬可夫模型於力量回授之插配任務",第十六屆全國自動化科技研討會論文集,pp. 297~302,高雄第一科技大學,高雄.
  40. 林鎮洲,游竟人,林翰屏,2008,"水下超音波影像系統之目標物追蹤模組之研發",第十屆水下技術研討會論文集,pp. 151~157,中山大學,高雄市.
  41. 張忠誠,王榮華,鄭慕德,陳柏台,林俊華,林鎮洲,2008,"水下步進相移陣列超音波影像系統之研發",第十屆水下技術研討會論文集,pp. 321~329,中山大學,高雄市.
  42. 林鎮洲,陳盈丞 ,2007,"基於機器學習與視覺技術之桌上曲棍球機器人 ",第十屆全國機構與機器設計學術研討會論文集,pp. 488~494,中興大學,台中市.
  43. 林鎮洲,林奇麟 ,2007,"結合機器視覺技術應用於自動化拼圖組裝 ",第十屆全國機構與機器設計學術研討會論文集,pp. 495~500,中興大學,台中市.
  44. 林鎮洲,楊智任,張文桐,2007,"運用加速規於載具定位",中國機械工程學會第二十四屆全國學術研討會論文集,No. B14-0016,中原大學,桃園中壢.
  45. 林鎮洲,王若文,2007,"運用力量回授於自動化插配作業",中國機械工程學會第二十四屆全國學術研討會論文集,No. D03-0002,中原大學,桃園中壢.
  46. C. -C. Lin, W. -K. Liao, 2007, "The Displacement Analysis of a Concentric Double Universal Joint," Proceedings of The 12th World Congress in Mechanism and Machine Science, IFToMM2007, CK-397, Besancon, France.
  47. 林鎮洲,王若文,楊智任,2007,"運動感測系統之研發用於水下作業系統之運動狀態估測與控制(3/3)",第九屆水下技術研討會論文集,pp. 128 ~135,台灣大學,台北.
  48. 張忠誠,陳柏台,林俊華,王榮華,林鎮洲,楊智任,王若文,2007,〝水下 感測元件及系統之研發以應用於水下作業〞,第九屆水下技術研討會論文集,pp. 88~92,台灣大學,台北.
  49. 林鎮洲,廖偉凱 ,2006,"三重球面對稱連桿萬向接頭之位移分析 ",第九屆全國機構與機器設計學術研討會論文集,pp. 773~780,正修科技大學,高雄市.
  50. 林鎮洲,廖偉凱 ,2006,"湯普生等速連軸機構之位移分析 ",第九屆全國機構與機器設計學術研討會論文集,pp. 781~788,正修科技大學,高雄市.
  51. 林鎮洲,莊仁杰,2006,"以主動式輪廓模型結合樣版比對為基礎之即時目標物追蹤系統",中國機械工程學會第二十三屆全國學術研討會論文集,Paper No. B2-004 (pp. 1~6),崑山科技大學,台南永康.
  52. 林鎮洲,張家鳴,2006,"利用機器視覺輔助力量回授於物件輪廓掃瞄",中國機械工程學會第二十三屆全國學術研討會論文集,Paper No. B4-003 (pp. 1~6),崑山科技大學,台南永康.
  53. 林鎮洲,張家鳴,廖偉凱,楊智任,王若文,2006,"運動感測系統之研發用於水下作業系統之運動狀態估測與控制(2/3)",第八屆水下技術研討會論文集,pp. 233 ~238,台灣大學,台北.
  54. 張忠誠,陳柏台,林俊華,王榮華,林鎮洲,張家鳴,廖偉凱,楊智任,王若文,2006,〝水下 感測元件及系統之研發應用於水下作業〞,第八屆水下技術研討會論文集,pp. 225 ~232,台灣大學,台北.
  55. 林鎮洲,余典桓,陳盈丞,李耀民 ,2005," 7R連桿機構應用於等速萬向聯軸器之分析與實驗 ",第八屆全國機構與機器設計學術研討會論文集,pp. 234~241,台北科技大學,台北.
  56. 林鎮洲,李維倫,2005,"考慮慣性效應之力量傳遞性能於平面連桿機構",中國機械工程學會第二十二屆全國學術研討會論文集,Paper No. C5-003 (pp. 1~6),中央大學,中壢.
  57. 張忠誠,陳柏台,林俊華,王榮華,林鎮洲,張家源,張力中,徐偉群,張家鳴,廖偉凱,2005,〝水下 感測元件及系統之研發應用於水下作業〞,第七屆水下技術研討會論文集,pp. 166~171, 高雄海洋科技大學,高雄.
  58. 徐偉群,林鎮洲,張家鳴,廖偉凱,2005,〝 運動感測系統之研發用於水下作業系統之運動狀態估測與控制〞,第七屆水下技術研討會論文集,pp. 194~201, 高雄海洋科技大學,高雄.
  59. 林鎮洲,陳正鍇,2004,"7R等速聯軸機構之運動分析",中國機械工程學會第二十一屆全國學術研討會論文集,pp. 2751~2756,中山大學,高雄.
  60. 林鎮洲,陳正鍇,2004,"Tracta等速聯軸機構之運動與靜力分析",第七屆全國機構與機器設計學術研討會論文集,pp. 219~226,崑山科技大學,台南.
  61. 張忠誠,林鎮洲,王榮華,鄭慕德,張家源,張力中,吳政彰,徐偉群,李俊錫,方邦隆,2004,〝遠端操控水下機械臂系統應用於水下施工作業之技術研發〞,第六屆水下技術研討會論文集,pp. 165~168,永達技術學院,屏東.
  62. 林鎮洲,吳聲輝,2004,"機械臂之接觸式物件輪廓掃瞄",第六屆水下技術研討會論文集,pp. 185~190,永達技術學院,屏東.
  63. C. C. Chang, J. H. Wang, C. C. Lin, M. D. Jeng, and C. Y. Chang, 2004, "The Study of Remotely Teleoperated Robotic Manipulator System for Underwater Constructions," 2004 IEEE International Symposium on Underwater Technology, Taipei, Taiwan.
  64. 張忠誠,林鎮洲,王榮華,鄭慕德,吳政彰,徐偉群,李俊錫,方邦隆,2004,〝遠端操控水下機械臂系統應用於水下施工作業之技術研發〞,第十六屆造船暨輪機工程研討會論文集,pp. 86~89, 台南.
  65. 張文桐,林鎮洲,2003,"3-RRR平台機構力量傳遞性能之最佳化設計",中國機械工程學會第二十屆全國學術研討會,C06-01, pp. 947~954,台灣大學,台北.
  66. 林鎮洲,盧志忠,2003,"應用類神經網路於水下機械臂之定位校正",第五屆水下技術研討會論文集,pp. 169~175, 中山大學,高雄.
  67. 張忠誠,林鎮洲,王榮華, 鄭慕德,鄭禹廷,張家源,黃俊仁,吳聲輝,蔡登宇,2003,"遠端操控水下機械臂系統應用於水下施工作業之技術研發",第五屆水下技術研討會論文集,pp. 158~163, 中山大學,高雄.
  68. C. C. Lin, W. T. Chang, J. J. Lee, 2002, "The Force Transmission Performance of Planar Multiloop Linkages," The 26th National Conference on theoretical and Applied Mechanics, Paper No. L008 (pp.1-12), Hu-Wei, Taiwan, ROC.
  69. W. T. Chang, C. C. Lin, J. J. Lee, 2002, "The Force Transmission Performance of Parallel Manipulators," The 26th National Conference on theoretical and Applied Mechanics, Paper No. L007 (pp.1-12), Hu-Wei, Taiwan, ROC.
  70. 林鎮洲,張忠誠,鄭慕德,王榮華,李新樂,鄭禹廷,2002,"遠端操控水下機械臂系統應用於水下施工作業之技術研發",第四屆水下技術研討會論文集,pp. D1-7~D1-12,台灣大學,台北.
  71. 林鎮洲,盧志忠,2002,"遠端操控機械臂系統應用於水下施工作業之運動控制技術研發",第四屆水下技術研討會論文集,pp. D1-13~D1-17,台灣大學,台北.
  72. Lin, C. C., Chang, W. T., 2001, “A New Force Transmission Index for Planar Linkage Mechanisms,” Proceedings of The 18th CSME National Conference on Mechanical Engineering, Vol. 3, pp. 703-711, Taipei, Taiwan, ROC.
  73. 林鎮洲,游宏達,2001,“虛擬實境於遠端操控網路機械臂之應用”, 中國機械工程學會第十八屆全國學術研討會論文集,第五冊(新興工程技術),pp. 497-504,台灣科技大學,台北.
  74. Lin, C. C., Chang, C.C., Jeng, M.D., Wang, J. H., 2001, “Development of an Intelligent Underwater Robotic Manipulator System,” Proceedings of OCEANS 2001 MTS/IEEE Conference, Vol. 2, pp.1036-1040, Honolulu, Hawaii, U.S.A.
  75. Chang, C.C., Lin, C. C., Wang, J. H., Jeng, M.D., 2001, “The Study of Ultrasonic Distance Measurement Device for Teleoperated Robotic Manipulator System,” Proceedings of OCEANS 2001 MTS/IEEE Conference, Vol. 2, pp.1054-1057, Honolulu, Hawaii, U.S.A.
  76. 林鎮洲,張忠誠,鄭慕德,王榮華,曾世和,2001,“智慧型水下機械臂系統技術研發與實作”,第三屆水下技術研討會論文集,pp. E-1~E-5,台灣海洋大學,基隆.
  77. Lin, C. C., and Chang, C. C., 2000, " The Transmissivity Analysis of Planar Six-Bar Mechanisms," Proceedings of the ASME 26th Biennial Mechanisms and Robotics Conference, DETC2000/MECH-14194, Baltimore, MD, USA.
    C. C. Chang, C. C. Lin, M. D. Jeng, J. H. Wang, S. K. Kau and U. C. Chen, 1999, “The Study of Distance Measurement Using Ultrasonic Sensors” The 12th symposium of the Acoustical society of the Republic of China, pp. 153-161, Taipei, Taiwan.
  78. 林鎮洲, 黃清復, 1999, "帶驅動水下機械臂之適應控制應用," 中國機械工程學會第十六屆全國學術研討會 -控制與自動化, pp. 227-233,清華大學,新竹.
  79. 王榮華, 鄭慕德, 林鎮洲, 張恆毅, 張忠誠, 1998, "智慧型水下機械臂之研究," 第一屆水下技術研討會論文集,pp. 33-40, 台北.
  80. 林鎮洲, 黃清復, 陳附仁, 1998, "水下機械臂之適應控制應用," 第一屆水下技術研討會論文集, pp. 41-46,台北.
    C.C.Chang, G.S.Guo and C.L.Lin, 1998, ”Fabrication and Characterization of LNO-based PZT Thin Film Ultrasonic Acoustic Sensors” Proceeding of the 20th Ocean Engineering Conference, Taiwan, Republic of china, Keelung, pp. 659-662.
  81. Lin, C. C., Chen, R. C., Li, T. L., and Chang, C. C., 1997, "Experimental Determination of The Hydrodynamic Coefficients of An Underwater Manipulator," CSME Proceedings of The 14th National Conference on Mechanical Engineering (Control & Automation), pp. 315-321, Chung-Li, Taoyuan, Taiwan, ROC.
  82. Lin, C. C., Chen, R. C., and Li, T. L, 1997, "Dynamic Modeling of An Underwater Manipulator," Proceedings of The Fifth National Applied Mechanisms And Robotics Conference, AMR 97-065, Cincinnati, OH, USA.
  83. Lin, C. C., 1995, "Synthesis of Spherical Four-Bar Mechanisms Using Continuation Method-Motion and Path Generation," Proceedings of the Fourth Applied Mechanisms & Robotics Conference, AMR 95-065, Cincinnati, OH, USA.
  84. 林鎮洲, 唐聰隆, 1995, "球面六連桿平臺機構之運動分析與工作空間," 中國機械工程學會第十二屆學術研討會論文集 - 設計製造組, pp. 101-110, 中正大學, 嘉義民雄.
  85. Lin, C. C. and Tsai, L. W., 1991, “The Trajectory Analysis of Bevel Planetary Gear Trains,” Proceedings of the 1991 ASME Design Automation Conference, Miami, FL, DE-Vol. 32-2, pp. 443-450.
  86. Lin, C. C. and Tsai, L. W., 1991, “The Workspace of Three-Degree-of-Freedom, Four-Jointed Spherical Wrist Mechanisms,” Proceedings of the 1991 IEEE International Conference on Robotics and Automation, Sacramento, CA, Vol. 2, pp. 1548-1553.
  87. Lin, C. C. and Tsai, L. W., 1989, “The Development of an Atlas of Bevel-Gear-Type Spherical Wrist Mechanisms,” Proceedings of the 1st National Conference on Applied Mechanisms and Robotics, Cincinnati, OH, Paper No. 89-AMR-2A-3.
  88. Tsai, L. W. and Lin, C. C., 1988, “The Creation of Non-fractionated, Two Degree-of-Freedom Epicyclic Gear Trains,” Proceedings of the 1988 ASME Mechanisms Conference, Kissimmee, FL, DE-Vol. 15-1, pp. 153-164.
  89. Lin, C. C., Ko, J. Y., Chen, C. H., and Chang, W. T., “The Design and Preliminary Assessment of a New Knee Ligament Arthrometer,” Proceedings of 2011 4th International Conference on Biomedical Engineering and Informatics, Vol. 3, 2011, pp. 1174-1178,Shanghai, China.
  90. 林鎮洲、陳志華、張文桐、柯雋彥、王裕德、許筱曼,2011,”膝關節穩定度量測儀之研發與創新設計”,2011生物醫學工程技術研討會暨國科會醫學工程學門成果發表會論文集,No. 031100614,成功大學,台南市.
  91. 林鎮洲、王裕德,2011,”穿戴式步行輔助器”,第十四屆全國機構與機器設計學術研討會論文集,L-004,中央大學,桃園中壢.
  92. 林鎮洲、劉俊宏,2011,”推拉板式波浪能轉換器之性能探討”,中國機械工程學會第二十八屆全國學術研討會論文集,A08-021,中興大學,台中市.
  93. C. C. Lin, J. S. Liou, 2010, "Dynamic Tracking of Underwater Object," Proceedings of The 27th CSME National Conference on Mechanical Engineering, BB13-016,台北科技大學,台北市
  94. Y. H. Lee, D. L. Wang, Y. C. Chang, Y. C. Chow, C. C. Lin, 2010, "Preliminary Experimental Investigation on the Kinematic Characteristics of Flap-Type Wave Energy Converter," Proceeding of The 32 Ocean Engineering Conference, pp. 837-842,海洋大學,基隆市.


 Other Publications

  1. 林鎮洲,吳聲輝,2004,"接觸式物件輪廓掃瞄," Newsletter of The Chinese Society of Mechanism and Machine Theory, Vol. 15, No. 1, pp. 1-5.
  2. 林鎮洲, 1999, "水下航行機器人:水下載具-機械臂系統," Newsletter of The Chinese Society of Mechanism and Machine Theory, Vol. 10, No. 3, pp. 16-21.
  3. 莊水旺, 林鎮洲, 盧崑宗, 1998, 數值控制工具機國家標準調和案,中央標準局研究計劃報告, 台灣省工業會.
  4. 張智強, 林鎮洲, 1996, "定轉速比萬向連軸機構之簡介," Newsletter of The Chinese Society of Mechanism and Machine Theory, Vol. 7, No. 3, pp. 7-12.


 Patents

  1. 具有安全釋放功能之義手構造,中華民國專利新型第 M245957號。(10/2004~10/2013)專利說明書(partial)
  2. 人力推進載具用省力踏板驅動機構,中華民國專利新型第 M282911號。(12/2005~3/2015)  
  3. 自行車之無段變速裝置,中華民國專利發明第 I269749號。(1/2007~3/2026)
  4. 波浪能轉換器,中華民國新型專利申請案號101207211,專利權人:國立臺灣海洋大學。
  5. 膝關節韌帶鬆弛度量測裝置及量測方法,中華民國發明專利申請案號100111256,專利權人:國立臺灣海洋大學。