Hsiu-Chuan Hsu, Yu-Cyuan Lin, Shing-Hoa Wang, Fang-Hsin Kao, Wei-Chih Lee, Jer-Ren Yang, Ping-Wei Hsu, Woei-Shyan Lee, 2010, ''Inducement of bainite and carbide transformation from retained austenite based on a high strain rate,'' Scripta Materialia,Vol.62,P.372–P.375.(SCI)
Hwang-Wen Wang, San-Der Chyou, Shing-Hoa Wang, Po-Kai Chiu, Ching-Chih Yen, Bor- Yuan Chen, Ming-Wei Yang, Hwa-Chong Tien, Nan-Nong Huang, 2010, ''Hydrogen absorption properties of Mg2Ni alloy with excess Mg synthesized by wet milling in toluene without annealing,'' Journal of Alloys and Compounds,Vol.491,623-626.(SCI)
Pei-Hung Kuo, Shing-Hoa Wang, Peter K. Liaw, Guo-Jiang Fan, Hsiao-Tsung Tsang, Dongchun Qiao, Feng Jiang, 2010, ''Bulk-metallic glasses joining in a supercooled-liquid region,'' Materials Chemistry and Physics, Vol.120,P.532-P.536.(SCI)
Shing-Hoa Wang, Hao-Hsun Lee, Chih-Yuan Chen, Jer-Ren Yang and Chin-Hai Kao,2009,“The variation of beta phase morphology after creep and negative creep for duplex titanium alloys,Journal of Materials Science”,Vol. 44, Issue 2,PP.408-413.(SCI)
F.H. Kao, W.C. Li, C.Y. Chen, C.Y. Huang, J.R.Yang and S.H. Wang,2009,“Cross-sectional observation of the intermetallic phase in a galvannealed steel”,Materials Science and Engineering A,Vol.499,PP.45-48.(SCI)
C.Y. Chen, H.W. Yen, F.H. Kao, W.C. Li, C.Y. Huang, J.R.Yang and S.H.Wang,2009,“Precipitation hardening of high-strength low-alloy steels by nanometer-sized carbides”,Materials Science and Engineering A,Vol.499,PP.162-166.(SCI)
Hwang-Wen Wang, San-Der Chyou, Shing-Hoa Wang, Ming-Wei Yang, Chin-Yu Hsu, Hwa-Chong Tien and Nan-Nong Huang, 2009, “Amorphous phase formation in intermetallic Mg2Ni alloy synthesized by ethanol wet milling,” Journal of Alloys and Compounds, 479(1-2):330-333. (SCI)
Gwo-Chung Tsai, Shing-Hoa Wang, Chi-Chong Wang,2008,“Notch Effect and FEM Analysis of Tensile Behavior of Ti-6Al-4V”,Material Science and Engineering A,in refereed review.(SCI)
Yu-Cyuan Lin, Bee-Fong Wu, Yi-Ming Jen, Shing-Hoa Wang, Hsiu-Chuan Hsu, Ji-Jung Yeh,2008,“The influence of shot peening induced residual stress on post-necking behavior of tempered ultrahigh strength low alloy 300M steel”,Metallurgical and Materials Transactions A,in revised.(SCI)
Hwang-Wen Wang, San-Der Chyou, Shing-Hoa Wang, Ming-Wei Yang, Chin-Yu Hsu, Hwa-Chong Tien and Nan-Nong Huang,2008,“Amorphous phase formation in intermetallic Mg2Ni alloy synthesized by ethanol wet milling,Journal of Alloys and Compounds”,DOI information: 10.1016/j.jallcom.2008.12.077.(SCI)
Wuan-Yun Hsiao, Shing-Hoa Wang, Chih-Yuan Chen, Jer-Ren Yang, and Woei-Shyan Lee,2008,“Effects of dynamic impact on mechanical properties and microstructure of special stainless steel weldments”,Materials Chemistry and Physics,Vol. 111, Issue 1,PP.172 - 179.(SCI)
Yeong-Der Yao, Shing-Hoa Wang, Feng-Shiu Chan,2008,“Microstructure and magnetic variations induced by plastic deformation in Ni72Cr16Fe8”,Journal of Applied Physics,Vol. 103, Issue 7,P.e711.(SCI)
Hao-Hsun Lee, Shing-Hoa Wang, Ching-Ying Shih, Ching-Min Cheng, Hsiu-Chuan Hsu, Kevin Kan, Chien-Ming Sung,“Relaxing welding residual stresses by diamond-like carbon(DLC) coating on duplex titanium alloys”,Sci. Tech. weld. Join.,Vol. 13, No.1,PP.75-79.(SCI)
S.H.Wang, C.S.Huang, W.S.Lee, T.H.Chen, C.C.Wu, C.Lien,2007, “Induced γ phase Transformation in the Weldment of Special Stainless Steel by Dynamic Impact, Materials Chemistry and Physic”s,in refereed review. (SCI)
Shing-Hoa Wang, Pei-Hung Kuo, Hsiao-Tsung Tsang, Rong-Ruey Jeng and Yu-Lon Lin, 2007, “The influence of Sc addition on the welding microstructure of Zr-based bulk metallic glass: the stability of the amorphous phase”, Applied Physics Letters, Vol. 91, P.171902. (NSC-96-2221-E-019-017)(SCI)
hing-Hoa Wang, Chia-Chang Wu, Chih-Yuan Chen, Jer-Ren Yang, Po-Kay Chiu, Jason Fang, “Cyclic deformation and phase transformation of 6Mo Superaustenitic stainless steel”, Metals and Materials International, revised on February 2007. (NSC-91-2216-E-019-009)(NSC-92-2216-E-019-010)(NSC-93-2216-E-019-003)(SCI)
C.C.Wu, S.H.Wang, C.Y.Chen, J.R.Yang, P.K.Chiu, Jason Fang, April 2007, “Inverse effect of strain rate on mechanical behavior and phase transformation of superaustenitic stainless steel”, Scripta Materialia, 56(8):717-720. (NSC-93-2216-E- 019-003) (SCI,EI)
C.C.Chiang, S.H.Wang, J.S.Chen, J.P.Chu, Y.F.Hsu, April 2007, “Bending embrittlement of as-welded FeAl alloys”, Intermetallics, 15(4):564-570. (NSC89-2216- E-019-005) (SCI,EI)
C.S. Huang, S.H. Wang, C.C. Wu, Y.S. Huang, Jason Fang, 2006, “Comparison of Strain Ratio Effect on Cyclic Plastic Deformation for Special Stainless Steels“, Scripta Materialia, 54(6):1181-1186. (NSC-91-2216-E-019-009) (NSC-92-2216-E-019-010) (NSC-93-2216-E-019-003) (SCI, EI)
S. H. Wang, P.K. Chiu, J. R. Yang, Jason Fang, 2006, “Gamma(γ) phase Transformation in Pulsed GTAW weld Metal of Duplex Stainless Steel”, Material Science and Engineering A, 420(1-2):26-33. (NSC-91-2216-E-019-009) (NSC-92-2216-E-019-010) (NSC-93-2216-E-019-003) (SCI, EI)
Feng Shiu Chan, Yeong Der Yao, Shing Hoa Wang, 2006, “Low Temperature Electrical Resistivity Study of Deformed Inconel Alloy 600”, Journal of Magnetism and Magnetic Materials, 304(1):e464~e466. (SCI, EI)
P.K. Chiu, S.H. Wang, J.R. Yang, K.L. Weng, Jason Fang, 2006, “The Effect of Strain Ratio on Morphology of Dislocation in Low Cycle Fatigued SAF 2205 DSS”, Materials Chemistry and Physics, 98(1):103~111. (NSC-91-2216-E-019- 009) (NSC-92-2216-E-019-010) (NSC-93-2216-E-019-003) (SCI, EI)
P.K. Chiu, K.L. Weng, S.H. Wang, J.R. Yang, Jason Fang, 2005, “Low-Cycle Fatigue Induced Martensite Transformation in SAF 2205 Duplex Stainless Steel”, Material Science and Engineering A, 398(2005):349~359. (NEC-91-2216-E-019-009) (NEC-92-2216-E-019-010) (NEC-93-2216-E-019-003) (SCI, EI)
Chih Sheng Huang, Shing Hoa Wang, Woei Shyan Lee, Tao-Hsing Chen, Charles Lien, 2005, “Dynamic Impact Behavior and Ferrite Variation of the Special stainless steels”, Scripta Materialia, 52(9):843~849. (NSC-91-2216-E-019-009) (NSC-92-2216-E-019 -010) (NSC-93-2216-E-019-003) (SCI, EI)
P.K. Chiu, S.H. Wang, K.L. Weng, J.R. Yang, Y.S. Huang, J. Fang, 2005, “A Study of Microstructure and Fatigue Property of Cyclic Plastic Deformation in Duplex Stainless Steel and its Weldment”, Journal of Materials Science and Engineering, 37(2):110~115. (in Chinese) (NSC-91-2216-E-019-009) (NSC-92-2216-E-019-010) (NSC-93-2216-E-019-003) (Referred)
S.H. Wang, F.S. Chan, Y.D. Yao, 2005, “Stain Induced Electrical Resistivity and Magnetic Behavior in Inconel 600”, Japanese Journal of Applied Physics, 44(7A):4935-4938. (SCI, EI)
Chih Sheng Huang, Shing Hoa Wang, Woei Shyan Lee, Tao-Hsing Chen, Charles Lien,”Dynamic Impact Behavior and Ferrite Variation of the Special stainless steels”, accepted and revised, Scripta Materialia, December 2004.(NSC-91-2216-E-019-009)(NSC-92-2216-E-019-010)(NSC-93-2216-E-019-003)(SCI)
J.C. Chang, Y.S. Huang, S.H. Wang, S.L.I. Chan,”EIS Study on Corrosion Behavior of Titanium Alloys Plastically Deformed by Low Cycle Fatigue”, submitted to Corrosion Science, on October 4, 2004.(NSC-89-2216-E-019-010)(NSC-90-2216-E-019-007)(SCI)
S.H. Wang, F.S. Chan, Y.D. Yao,”Stain Induced Electrical Resistivity and Magnetic Behavior in Inconel 600’, accepted and revised, Japanese Journal of Applied Physics, on December 2004.(Financial support by Academia Sinica, Institute of Physics)(SCI)
P.K. Chiu, K.L. Weng, S.H. Wang, J.R. Yang, Jason Fang,”Low-Cycle Fatigue Induced Martensite Transformation in SAF 2205 Duplex Stainless Steel”, submitted to Material Science and Engineering A, on October 27, 2004.(NEC-91-2216-E-019-009)(NEC-92-2216-E-019-010)(NEC-93-2216-E-019-003)(SCI)
Gwo-Chung Tsai, Shing-Hoa Wang, Chi-Chong Wang,“Notch Effect and FEM Analysis of Tensile Behavior of Ti-6Al-4V”, submitted to Mechanics of Matericals”, on September 27, 2004.(NSC-89-2216-E-019-010)(NSC-90-2216-E-019-007)(SCI)
S.H. Wang, Y.S. Huang, J.Q. Chang ,”Effect of Plastic Deformation Using Low Cycle Fatigue on the Corrosion Properties in Titanium Alloys”, submitted to Corrosion Science, revised on November 18, 2004.(NSC 89-2216-E-019-010)(NSC 90-2216-E-019-007)(SCI)
S.H. Wang, M.D. Wei, ”Tensile Properties of GTAW weldments in CP-Ti, Ti-6Al-4V and Ti –15V-3Al-3Sn-3Cr alloys at Different strain Rates”, Science and Technology of Welding and Joining, Vol.9, No.5 (2004), pp.415~422. (NSC 89-2216-E-019-101) (NSC 90-2216-E-019-007)(SCI)
Y.S. Huang, S.H. Wang, ”Physical Properties and Weldability of Magnesium Alloys”, Welding &Cutting, Vol. 13, No. 3, pp.33~42, September, 2003.
S.H. Wang, C.C. Chiang, S.L.I. Chan, ”Effect of Initial Microstructure on the Creep Behavior of TMCP EH36 and SM490C Steels ”, Materials Science and Engineering A , Vol, 344/1-2(2003), pp. 288-295 (NSC 87-2216-E-019-007) (SCI)
S.H. Wang, M.D. Wei, L.W. Tsay, “Tensile Properties of LBW Welds in Ti-6Al-4V Alloy at Evaluated Temperatures Below 450℃”, Materials Letters, Vol, 57(2003), pp.1815~1823.(NSC 89-2623-7-019-003)(SCI)
S.H. Wang, W.C.Luu, K.F.Ho, J.K.Wu,”Hydrogen permeation in a Submerged Arc Weldment of TMCP steel”, Materials Chemistry and Physics, Vol. 77/2 September 2002, pp. 447~454. (NSC 87-2216-E-019-009)(SCI)
S.H. Wang, C.C. Chiang, S.L.I. Chan, ”Effect of Microstructural Texture on the Creep Behavior”, Journal of Materials Science, Vol. 37, 2002, pp.3733~3737. (NSC 87-2216-E-019-007)(SCI)
S.H. Wang, ”Thermodynamic Aspect and Diffusion Model on Interdiffusion of Laminate Structrue”, J. of Marine Sci. and Tech., Vol. 8, No. 2, pp. 108~116 December 2000.( EI )
C.C. Kang, S.H. Wang, ”Repair of Composite Structures”, Welding &Cutting, Vol. 10, No. 6, PP. 59~68, Nov, 2000.
C.C. Chiang, S.H. Wang, ”The Principle and Mechanism of Hot Cracking in Welding”, Welding & Cutting, Vol.10, No.2, pp.41~51, March 2000. (NSC 89-2216-E-019-005)
W.H. Weng, S.H. Wang, ”The Application of Neural Network and Fuzzy Control to Welding”, Welding & Cutting, Vol.10, No.1, pp.87-94, January 2000.
Y.P. Tu, S.H. Wang, ”Brief Review on Heat Flow in Welding Pool”, Welding &Cutting, Vol.9, No.6, P.24, November 1999.
S.H.Wang, S.H.Shan and Y.C.Pang, ”Residual Stress and Its Effect on Corrosion Behavior of Butt Joints Cu/Al Alloys”, Science and Technology of Welding and Joining, Vol.4, No.3, 1999, p.182, The Institute of Materials, London, UK. (NSC-82-0113-E-019-076T)(SCI)
Y.J. Lin, S.H. Wang, S.L.I. Chan, ”Low Temperature Mechanical Properties of TMCP Weldments by Shield Metal Arc Welding”, Welding & Cutting, Vol.9, No.5, pp.56-68, September 1999. (NSC-85-2216-E-002-032, NSC-86-2216-E-002-025, NSC-87-2216-E-019-007)
C.F. Yu, S.H. Wang, S.L.I. Chan, ”High Temperature Characteristics of TMCP Steel Weldments”, Welding & Cutting, Vol.9, No.4, P.60, July 1999. (NSC-87-2216-E-019-007) 最佳論文獎* 2000 Best Paper Award of The Welding Association of ROC.
S.H.Wang, D.K.Matlock and D.L.Olson, ”An Analysis of Dynamic Compositional Fluctuation on Weld Metal Creep Based on Laminate Composites Simulation”, Science and Technology of Welding and Joining, Vol.4, No.3, 1999, p.170, The Institute of Materials, London, UK.(SCI)
T.Y. Liu, Y.C. Kang, S.H. Wang and S.L.I. Chan, ”Hydrogen Imbrittlement of AL- 6X and AL-6XN Superaustenistic Stainless Steel”, J. of Chinese Corrision Engineering, Vol. 12, No. 4, PP. 45~52(1998).
Y.J. Lin, S.H. Wang, S.L.I. Chan, ”The Influence of Rolling Process and Alloy Addition on Mechanical Properties of Steel and Weldments in Hydrogen Environment”, J. of Chinese Corrosion Engineering, Vol.12, No.4, PP.15~28 (1998). (NSC-87-2216-E-019-007) 最佳論文獎* 1998 Best Paper Award of The Corrosion Engineering Association of ROC.
M.Y. Lan, S.H. Wang, C.S. Wu, ”Vacuum Brazing on Lap Joint of Dissimilar Metals between Aluminum and Titanium”, Welding & Cutting, Vol.7, No.3, May 1997, P.1.
S.H.Wang, S.H. Shan, ”The Effect of Residual Stress on Corrosion Behavior in Pure Metal/Al Alloy Joints”, Journal of Chinese Corrosion Engineering,Vol.9, No.1, 1995, pp.15~22(NSC 82-0113-E-019-076-T)
S.H.Wang, Vol.2, No.1,(1994), ”Impression Creep Behavior in Weldments”, J. of Marine Sci. and Tech., pp.17-24. (EI)
S.H.Wang, D.K.Matlock and D.L.Olson, A167(1993), ”An Analysis of the Critical condition for Diffusion Induced Void Formation in Laminate Composites”, J. of Mat. Sci. and Eng., P.139. (SCI)
S.H.Wang, D.K.Matlock and D.L.Olson., Vol.27(1992), ”High Temperatur Deformation and Fracture Behavior of Laminate Composite: The Importance of Interdiffusion During Creep”, Scripta Met. et. Mat., P.35. (SCI)
W.S.Gibbs, S.H.Wang, D.K.Matlock and D.L.Olson, ”High Temperature Impression Creep Testing of Weldments”, Welding Journal , June 1985, p.153-s. (SCI)
L.E.Murr, S.M.Tuominen, A.W.Hare, and S.H.Wang, ”Structure and Hardness of Explosively Consolidated Molybdenum”, Materials Science and Eng., Vol.57(1983), p.107. (SCI)
L.E.Murr and S.H.Wang, ”Comparison of Microstructural Evolution Associated with the Stress-Strain Diagram for Nickel and Stainless Steel”, Res Mechanica, Vol.4, No.4, June 1982, P.237. (SCI Before 1993, Stop Publication)
L.E.Murr ,O.T.Inal and S.H.Wang, ”Explosive Shock Deformation of Metallic Glasses”, Mat. Sci. and Eng.,Vol.49(1981), p.57. (SCI)
L.E.Murr and S.H.Wang , ”Grain Boundary Deformation”, Res Mechanica Letters Vol. 1, Feb.,1981, P.85. (SCI Before 1993, Stop Publication)
Conference Papers
Shing-Hoa Wang, Pei-Hung Kuo, Peter K. Liaw, Guo-Jiang Fan, Hsiao-Tsung Tsang, Dongchun Qiao, Feng Jiang, 2009, Solid State Bonding of Zr Based and Cu Based BMG, TMS 2009 138th annual Meeting of The Minerals, Metals & Materials Society.
Shing-Hoa Wang, 2009, Solid State Bonding of bulk metallic glasses”, 2009 Cross –Strait Conference on Metallic Glasses, National Taiwan University of Science and Technology.
黃智生, 王星豪, 方仁,”The influence of strain ratio on cyclic plastic deformation for special stainless steels", 中國材料科學學會2004年全國學術論文會議, 民國93年11月17~ 18日, 國立清華大學, 新竹(NSC-91-2216-E-019-009)(NSC-92-2216-E-019-010)(NSC-93-2216-E-019-003)
邱柏凱, 王星豪, 翁光良, 楊哲人, 方仁,”A study of microstructure and fatigue property of cyclic plastic deformation in deplex stainless steel and its weldment”, 中國材料科學學會2004年全國學術論文會議, 民國93年11月17~ 18日, 國立清華大學, 新竹(NSC-91-2216-E-019-009)(NSC-92-2216-E-019-010)(NSC-93-2216-E-019-003) (材料科學論文獎, 優等獎)
P.K. Chiu, K.L. Weng, S.H. Wang, J.R. Yang, Jason Fang,”The microstructure of GTAW-P weldments in 2205 duplex stainless steel”, 中華民國銲接協會2004年全國學術論文會議, 北台科學技術學院, 台北 關渡, 民國93年10月(NSC-91-2216-E-019-009)(NSC-92-2216-E-019-010)(NSC-93-2216-E-019-003)
S.H. Wang, F.S. Chan, Y.D.Yao,”Strain induced electrical resistivity and magnetic behavior in Inconel alloy 600”, The First Asia Forum on Magnetics International Conference, 2004 september 21~24, Okinawa, Japan
M.D. Wei, S.H. Wang, ” Fatigue Behavior of Weldments in PureTitanium , Ti-6Al-4V and Ti-15V-3Cr-3Sn-3Al ” , 91年度中華民國銲接年會論文集, pp.B34~B41, 91年10月, 台中, 中興大學. (NSC 89-2216-E-019-010, NSC 90-2216-E-019-007)
M.D. Wei, S.H. Wang, ”Low Cycle Fatigue Behavior of GTA Welds in Titanium Alloys ” , A111, AMTE 2002, International Conference on Advanced Manufacturing Technologies and Education in the 21st Centry, August 11~14, 2002, National Chung Cheng University, Chia-Yi, Taiwan. (Refereed)(NSC 89-2216-E-019-010, NSC90-2216-E-019-007)
S.H. Wang, C.C. Chiang, J.P. Chu, ”Environmental Embrittlement of Liquid for the Welds of FeAl Alloys ”, pp.810-814 , in 6th International Conference on Trends in Welding Research, 2002, April 15-19, 2002, Pine Mountain, Georgia, USA, ASM International Materials Park, USA. ( NSC 89-2216-E-019-005) (Refereed)
S.H. Wang, C.C. Chiang and S.L.I. Chan, ”The Effect of Microstructural Morphology of Steel on Threshold Stress in Creep”, pp.321~325, in Proceedings of the 7th International Conference on Creep and Fatigue at Elevated Temperatures, - Creep 7,June 3~8, Tokyo, Japan, 2001 National Institute for Materials Science, Tsukuba, Japan.The Japan Society of Mechanial Engineers,Shinjukuku 2001.(NSC 87-2216-E-019-007) (Refereed)
S.H.Wang, S.H.Shan, T.P.Tang, ”Corrosion Behavior in Friction Welding of Ferrous Steel-The Effect of Heterogenity”, p.191, in The 9th Asian-Pacific Corrosion Control Conference, Nov. 5-10, 1995, Kaohsiung, Taiwan, R.O.C.(NSC-82-0113-E-019-076T)(refereed)
H.Chung, S.H.Wang and J.K.Wu, 1995, ”Creep Behavior of 2024 Al and Interstitial Free Steel”, Abstract for International Symposia on advanced Materials and Technology for the 21st Centry, TMS, Hawaii, U.S.A., p.158. (NSC-84-2216-E-019-007)
S.H.Wang, Y.C.Pan, S.H.Shan, ”Induced Residual Stress on Butt Joint of Copper with Aluminum Alloy”, Processding of The 1994 Far East Conference on NDT(FENDT '94) and ROCNST Ninth Annual Conference. Taipei, Taiwan, R.O.C., November 3-5, 1994, P.381. (NSC-82-0113-E-019-076T)
S.H.Wang, D.K.Matlock and D.L.Olson, 1993, ”Effect of Compositional Gradients on the High Temperature Creep Behavior of Laminate Composites and Solidified Weld Metal”, Abstract for 1993 TMS Conference, Denver, Colorado, U.S.A., P.145.
S.H.Wang, D.K.Matlock and D.L.Olson, 1992, ”Physical Simulation for the High Temperature Creep Behavior for Weld Metal”, P.605, 3rd International Conference on Trends in Welding Research, Gatlinburg, Tennessee, U.S.A., June, 1992, ed. by S.A.David and J.M.Vitek, ASM, Material Park, Ohio, U.S.A.
L.E.Murr, F.L. Williams, D.M.Smith, P. Predecki and S.H. Wang , ”A Preliminary Survey of High -Enegy Switch Materials Degradation”, Proc. 3rd IEEE International Pulsed Power Conference, Albuquerque, New Mexico, June 1981, Edited by T.H.Martin and A.H. Guenther, IEEE Nuclear and Plasma Sciences Society.
L.E.Murr and S.H.Wang , ”Yielding and Plastic Flow in Stainless Steel”, 38th , Ann. Pro. Electron Microscopy Soc. Amer. , San Francisco, Cal., U.S.A. ,1980. P.386
Wang ,”Impression Creep and Deformation Behavior in MultipassWeldments”, Internal CSM Report at Colorado School of Mines, Golden, Colorado, U.S.A., June 1986.