跳到主要內容區
  1. 首頁
  2. 系所成員
  3. 師資陣容
  4. 專任師資
  5. 林益煌

林益煌

姓名職稱 林益煌 教授 林益煌
研究室 機械系館A棟205室
電　話 (02) 2462 2192 ext. 3208
傳　真 (02) 2462-0836
E-mail yhl2@mail.ntou.edu.tw
學　歷 美國賓州州立大學機械工程博士
經　歷 國立台灣海洋大學機械與機電工程學系教授
研究領域 振動力學 、結構控制、有限元素分析、機械設計
實驗室 振動實驗室-MEA206
教學課程 研究所：高等振動學、模態分析
大學部：振動學、工程力學
著　作 研究計畫　│Refereed Papers　│ Conference Papers　│ Other Publications


 研究計畫

  1. "應用弱輻射嵌板陣列之噪音與振動制抑"，科技部102年度計畫。
  2. "高效低噪烘手機之創新設計"，科技部102年度計畫。
  3. "靜音烘手機結構減振降噪之研究"，和光工業股份有限公司102年度計畫。
  4. "承受具複雜運動特徵移動動態負載之撓性樑的最佳追蹤振動制抑"，科技部101年度計畫。
  5. "承受移動動態負載之精密機械的動態分析與振動控制"，科技部100年度計畫。

 Refereed Papers

  1. Y.-H. Lin, W.-S. Lee, C.-Y. Wu, 2014, “Automated Fault Classification of Reciprocating Compressors from Vibration Data: A Case Study on Optimization using Genetic Algorithm,” Procedia Engineering, 79, 355 – 361. NSC 101-2221-E-019-002. (EI)
  2. 周世剛,林益煌,閻順昌,2014, “高速風扇之進氣噪音制抑, 應用聲學與振動學刊,” 6(2),244-250. NSC 102-2221-E-019-020.
  3. Y.-H. Lin, J.-L. Chen, C.-L. Chu, and Y.-K. Tsai, 2013, “Numerical Stability Analysis for Independent  Modal Vibration Suppression of a Fluid-conveying Pipe Using a Piezoelectric Inertia Actuator,” Journal of Marine Science and Technology, 21(5), 545-550. NSC 97-2221-E-019-055-MY3. (SCIE)
  4. Y.-H. Lin, W.-S. Lee, and C.-Y. Wu, 2013. “A Novel Signal Processing Approach for Valve Health Condition Classification of a Reciprocating Compressor with Seeded Faults Considering Time-Frequency Partitions,” Journal of Marine Science and Technology, 21(5), 578-585. NSC 97-2221-E-019-055-MY3. (SCIE)
  5. Yih-Hwang Lin, Huai-Sheng Liu, Chung-Yung Wu, 2009, “Automated valve condition classification of a reciprocating compressor with seeded faults: experimentation and validation of classification strategy,” SMART MATERIALS AND STRUCTURES, 18:1–19. (SCI)
  6. H.-C. Yu, Y.-H. Lin and C-L. Chu, 2007, “Robust Modal Vibration Suppression of a Flexible Rotor,” Mechanical Systems and Signal Processing, 21:334-347. (NSC 91-2611-E-019-024) (SCI)
  7. C.-L. Chu, B.-S. Wu, and Y.-H. Lin*, 2007, “An Experimental Study on Active Micro-vibration Suppression of a Flexible Beam Mounted on an Elastic Base,” Measurement Science and Technology, 18:1823-1830, doi:10.1088/0957-0233/18/7/005. (SCI)
  8. Y.-H. Lin, H.-C. Wu, and C.-Y. Wu, 2006, “Automated condition classification of a reciprocating compressor using time–frequency analysis and an artificial neural network,” Smart Materials and Structures, 15:1576-1584. (SCI)
  9. C.-L. Chu, B.-S. Wu, and Y.-H. Lin, 2006, “Active vibration Control of a Flexible Beam Mounted on an Elastic Base,” Finite Elements in Analysis and Design, 43:59-67. (SCI)
  10. Y.-H. Lin*, R.-C. Huang, and C.-L, Chu, 2004, “Optimal Modal Control of a Fluid-conveying Pipe with a Divergent Mode,” Journal of Sound and Vibration, 271:577-597. (NSC-89-2212-E-019-013). (SCI)
  11. Y.-H. Lin* and H.-C. Yu, 2004, “Active Modal Control of a Flexible Rotor,” Mechanical Systems and Signal Processing, 18:1117-1131. (NSC-89-2212-E-019-013). (SCI)
  12. Y.-H. Lin* and S.-C. Lin, 2001, “Optimal Weight Design of Rotor Systems with Oil Film Bearings Subjected to Frequency Constraints,” Finite Elements in Analysis and Design, Vol. 37, pp.777-798. (NSC-86-2212-E-019-001). (SCI)
  13. Y.-H. Lin* and C.-L. Chu, 2001, “Active Modal Control of Timoshenko Pipes Conveying Fluid,” Journal of the Chinese Institute Engineers, Vol. 24, No. 1, pp. 65-74. (NSC-87-2212-E-019-004). (SCI)
  14. Y.-H. Lin* and J.-R. Huang, 1999, “Nonlinear Optimal Vibration Suppression of Timoshenko Beams Traversed by a Moving Mass,” Journal of the Chinese Institute of Engineers , Vol. 22, No. 4, pp. 489-498. (NSC-86-2212-E-019-001). (SCI)
  15. Y.-H. Lin* and Y.-K. Tsai, 1997, “Non-linear Active Vibration Control of a Cantilever Pipe Conveying Fluid,” Journal of Sound and Vibration, Vol. 202, No. 4, pp. 477-490. (NSC-85-2212-E-019-002). (SCI)
  16. Y.-H. Lin* and Y.-K. Tsai, 1997, “Nonlinear Vibrations of Timoshenko Pipes Conveying Fluid,” International Journal of Solids and Structures, Vol. 34, No. 23, pp. 2945-2956. (NSC-85-2212-E-019-002). (SCI)
  17. Y.-H. Lin* and C.-H. Chou, 1997, “Performance of a Regulator Design for Vibration Control of Beam Structures Subjected to Multiple Moving Loads,” Journal of the Chinese Institute of Engineers, Vol. 20, No. 3, pp. 325-334. (NSC-82-0209-E-019-028). (SCI)
  18. Y.-H. Lin*, 1997, “Comments on Dynamic Behavior of Beams and Rectangular Plates under Moving Loads,” Journal of Sound and Vibration, Vol. 200, No. 5, pp. 721-725. (SCI)
  19. Y.-K. Tsai and Y.-H. Lin*, 1997, “Adaptive Modal Vibration Control of a Fluid-conveying Cantilever Pipe,”Journal of Fluids and Structures, Vol . 11, pp. 535-547. (NSC-85-2212-E-019-002). (SCI)
  20. Y.-H. Lin*, 1997, “Optimal Vibration Suppression in Modal Space for Flexible Beams Subjected to Moving Loads,” Shock and Vibration Journal, Vol. 4, No. 1, pp. 39-50. (NSC-81-0403-E-019-514). (SCI)
  21. Y.-H. Lin*, 1997, “Comments on Vibration Analysis of Beams Traversed by Uniform Partially Distributed Moving Masses,”Journal of Sound and Vibration, Vol. 199, No. 4, pp. 697-700. (SCI)
  22. Y.-H. Lin* and C.-L Chu, 1996, “Active Flutter Control of a Cantilever Tube Conveying Fluid using Piezoelectric Actuators,” Journal of Sound and Vibration, Vol. 196, No. 1, pp. 97-105. (NSC-83-0209-E-019-021). (SCI)
  23. J. R. Rieker, Y.-H. Lin and M. W. Trethewey*, 1996, “Discretization Considerations in Moving Load Finite Element Beam Models,” Finite Elements in Analysis and Design, Vol. 21, pp. 129-144. (SCI)
  24. Y.-H. Lin* and Y.-K. Tsai, 1996, “Nonlinear Free Vibration Analysis of Timoshenko Beams Using the Finite Element Method,” Journal of the Chinese Society of Mechanical Engineers, Vol. 17, No. 6, pp.609-615. (NSC-85-2212-E-019-002). (SCI)
  25. Y.-H. Lin*, 1995, “Comments on Dynamic Response of a Beam with Intermediate Point Constraints Subject to a Moving Load,” Journal of Sound and Vibration, Vol. 180, No. 5, pp. 809-812. (SCI)
  26. C.-L. Chu and Y.-H. Lin*, 1995, “Finite Element Analysis of Fluid-conveying Timoshenko Pipes,” Shock and Vibration Journal, Vol. 2, No. 3, pp. 247-255. (NSC-81-0403-E-019-514). (SCI)
  27. Y.-H. Lin* and C.-L Chu, 1995, “A New Design for Independent Modal Space Control of General Dynamic Systems,” Journal of Sound and Vibration, Vol. 180, No. 2, pp.351-361. (NSC-82-0209-E-019-028). (SCI)
  28. Y.-H. Lin* and C.-L Chu, 1995, “Numerical Evaluation for Stability and Performance of an Electronic Damping Device for Structural Vibration Control,” Journal of Sound and Vibration, Vol. 184, No. 5, pp. 929-933. (NSC-83-0209-E-019-021). (SCI)
  29. Y.-H. Lin*, 1994, “Vibration Analysis of Timoshenko Beams Traversed by Moving Loads,” Journal of Marine Science and Technology, Vol. 2, No. 1, pp.25-35. (SCI)
  30. Y.-H. Lin* and C.-L Chu, 1994, “Comments on Active Modal Control of Vortex-Induced Vibration of a Flexible Cylinder,”Journal of Sound and Vibration, Vol. 175, No. 1, pp.135-137. (SCI)
  31. Y.-H. Lin* and M. W. Trethewey, 1993, “Active Vibration Suppression of Beam Structures Subjected to Moving Loads: A Feasibility Study Using Finite Elements,” Journal of Sound and Vibration, Vol. 166, No. 3, pp.383-395. (SCI)
  32. Y.-H. Lin* and C.-H. Chou, 1993, “Vibration Suppression of Beam Structures Traversed by Multiple Moving Loads Using a Damped Absorber,” Journal of Marine Science and Technology, Vol. 1, No. 1, pp. 39-48. (SCI)
  33. Y.-H. Lin and M.W. Trethewey*, 1990, “Finite Element Analysis of Elastic Beams Subjected to Moving Dynamic Loads,”Journal of Sound and Vibration, Vol. 136, No. 2, pp.323-342. (SCI)
  34. Y.-H. Lin, M. W. Trethewey*, H. M. Reed, J. D. Shawley, and S. J. Sager, 1990, “Dynamic Modeling and Analysis of a High Speed Precision Drilling Machine,” ASME Journal of Vibration and Acoustics, Vol. 112, No.3, pp.355-365 (SCI)

 Conference Papers

  1. 李文琪, 林益煌*, 蔡耀坤, 游祥杰, 朱志良, 2005,“磁浮轉子系統之適應振動控制,”The 13th National Conference on the Society of Sound and Vibration, June 3, Chunghua, ROC. 計畫編號: NSC93-2611-E-019-022
  2. 朱志良*, 林益煌, 吳秉松, 2005,“具彈性邊界的撓性樑於基底振動上之最佳化獨立模態控制實驗,” The 13th National Conference on the Society of Sound and Vibration, June 3, Chunghua, ROC.
  3. 朱志良*, 林益煌, 吳秉松, 2005,“應用靜態縮減法及模態觀測器於彈性邊界樑的主動振動控制與實驗,”The 29th National Conference on Theoretical and Applied Mechanics, December 16-17, NTHU, Hsinchu, Taiwan, R.O.C.
  4. 林益煌, 張峻榮, 朱志良*, 2004,“輸送流體管樑之最佳化設計,”The 12th National Conference on the Society of Sound and Vibration,Taipei, ROC, Session C1, pp.1-7.
  5. 朱志良*, 吳秉松, 林益煌, 2004,“撓性樑固定於彈性基底之主動振動控制,” The 28th National Conference on Theoretical and Applied Mechanics, Taipei, ROC. pp. 2112-2119.
  6. 林益煌*, 張峻榮, 朱志良, 2004,“輸送流體管樑之最佳化設計,”The 12th National Conference on the Society of Sound and Vibration,Taipei, ROC, Session C1, pp.1-7.
  7. 游祥杰, 朱志良*, 林益煌, 2003,“撓性轉子系統之主動振動控制,”The 11th National Conference on the Society of Sound and Vibration, Keelung, ROC, pp.1-7. 計畫編號: NSC91-2611-E-019-024
  8. 劉懷聖, 林益煌*, 吳崇勇, 2003,“往復式壓縮機閥片之模態分析,”The 11th National Conference on the Society of Sound and Vibration, Keelung, ROC, pp. 206-211.
  9. 林益煌*, 張峻榮, 2003,“輸送流體之錐形管樑的動態分析,”The 11th National Conference on the Society of Sound and Vibration, Hsin-Chu, ROC, pp. 333-338. 計畫編號:NSC-89-2212-E-019-013
  10. 林益煌*, 黃建榮, 2002,“承受移動質量負載之提摩憲柯樑的非線性動態分析,” The Tenth National Conference on the Society of Sound and Vibration, Taipei, ROC, pp. 8-12. 計畫編號: NSC-86-2212-E-019-001
  11. 林益煌*, 游祥杰, 2001,“具發散模態之轉子系統的獨立模態振動控制,” The Ninth National Conference on the Society of Sound and Vibration, Hsin-Chu, ROC, pp 88-94. (理論組最佳論文獎) 計畫編號: NSC-89-2212-E-019-013
  12. 林益煌*, 陳其華, 2001,“彈性結構在移動負載作用下的主動與被動振動控制,” The Ninth National Conference on the Society of Sound and Vibration, Hsin-Chu, ROC, pp. 95-99. 計畫編號: NSC-89-2212-E-019-013
  13. 林益煌, 黃建榮, 2002,“承受移動質量負載之提摩憲柯樑的非線性動態分析,” The Tenth National Conference on Society of Sound and Vibration, Taipei, ROC, pp 8-12. 計畫編號: NSC-86-2212-E-019-001
  14. 林益煌, 游祥杰, 2001,“具發散模態之轉子系統的獨立模態振動控制,” The Ninth National Conference on Society of Sound and Vibration, Hsin-Chu, ROC, pp 88-94. (理論組最佳論文獎) 計畫編號: NSC-89-2212-E-019-013
  15. 林益煌, 陳其華, 2001,“彈性結構在移動負載作用下的主動與被動振動控制,” The Ninth National Conference on Society of Sound and Vibration, Hsin-Chu, ROC, pp 95-99. 計畫編號: NSC-89-2212-E-019-013
  16. 林益煌, 黃瑞成, 2000,“具發散模態之輸送流體管樑的獨立模態振動控制,”國科會機械固力及熱流能源學門研究成果研討會. 計畫編號: NSC-8-2212-E-019-001
  17. 林益煌, 何建毅, 1998,“輸送變速流體之管樑的主動振動制抑,” The Sixth National Conference on the Society of Sound and Vibration, Taoyuan, ROC, pp 89-98. 計畫編號: NSC-87-2212-E-019-004
  18. 林益煌, 張啟隱, 吳忠恕, 黃男農, 1997,“船舶軸系側向振動分析,” 第十屆中國造船暨輪機工程研討會, pp. 443-451.
  19. Y.-K. Tsai and Y.-H. Lin, 1997,“Model Reference Adaptive Flutter Control of Pipes Transporting Fluid,” The Fifth National Conference on the Society of Sound and Vibration, ROC, pp 351-360. 計畫編號: NSC-85-2212-E-019-002
  20. 林益煌, 蔡耀坤, 1996,“輸送流體之提摩憲柯樑的非線性振動分析,” The Fourth National Conference on Society of Sound and Vibration, Hsin-Chu, ROC, pp 93-103. 計畫編號: NSC-85-2212-E-019-002
  21. 林益煌, 林建哲, 1995, “應用壓電作動器於樑結構之直接回饋振動控制,” The 12th National Conference on Mechanical Engineering, The Chinese Society of Mechanical engineers, ROC, pp 373-382. 計畫編號: NSC-83-0209-E-019-021
  22. Y.-H. Lin and C.-L Chu, 1994,“ Active Vibration Control of a Cantilever Pipe Transporting Fluid,” The 18th National Conference on Theoretical and Applied Mechanics, ROC. pp. 109-116. 計畫編號: NSC-83-0209-E-019- 021
  23. Y.-H. Lin and E.-J. Chen, 1994,“ Modal Analysis for Thick Beam Structures,” Proceedings of the 12th International Modal Analysis Conference, pp.239-245. 計畫編號: NSC-82-0115-C-019-01-005
  24. 宋福元, 林益煌, 1994,“動態吸振器應用於連續系統振動壓制之研究,”The 11th National Conference on Mechanical Engineering, The Chinese Society of Mechanical Engineers, ROC. pp. 443-449. 計畫編號: NSC-83-0115-C-019-01-006
  25. 林益煌, 卓志華, 1994, “多個移動負載作用下之樑結構的主動振動控制,” The 11th National Conference on Mechanical Engineering, The Chinese Society of Mechanical engineers, ROC, pp 459-468. 計畫編號: NSC-82-0209-E-019-028
  26. Y.-H. Lin, 1992,“Dynamic Analysis of Timoshenko Beams Traversed by Moving Loads,” The 16th National Conference of Theoretical and Applied Mechanics, ROC. pp. 647-654. 計畫編號: NSC-80-0403-E-019-04
  27. Y.-H. Lin and C.-L Chu, 1993,“ Active Vibration Suppression of Timoshenko Beams Conveying Fluid,” Proceedings of 10th National Conference of the Cheinese Society of Mechanical Engineers, ROC, pp.727-735. 計畫編號: NSC-81-0403-E-019-514
  28. Y.-H. Lin and C.-L Chu, 1993,“Dynamic Analysis of Beam Structures Conveying Continuous Moving Mass,” Proceedings of 10th National Conference of the Chinese Society Mechanical Engineers, ROC, pp.699-707. 計畫編號: NSC-81-0403-E-019-514
  29. Y.-H. Lin and M.W. Trethewey, 1992,“Finite Element Analysis and Experimental Model Verification for Structures Subjected to Moving Dynamic Loads,” Proceedings of the 10th International Modal Analysis Conference, Vol. II, pp.1057-1063.
  30. Y.-H. Lin, 1992,“Stress Analysis of Laminated Composites with Temperature Gradient,” The 9th National Conference on Mechanical Engineering, The Chinese Society of Mechanical engineers, ROC, pp.89-96.
  31. 林益煌，卓志華，1992,“彈性樑在多個移動負荷作用下之減振研究,”The 16th National Conference of Theoretical and Applied Mechanics, ROC, pp.641-646. 計畫編號: NSC-81-0403-E-019-514
  32. Y.-H. Lin, 1991,“Thermoelastic Analysis of an Unrestrained Long Cylinder with Temperature Gradient,” The Fifteenth National Conference of Theoretical and Applied Mechanics, ROC. pp.705-711.
  33. Y.-H. Lin, M. W. Trethewey, and J. R. Rieker, 1990,“Modeling of a Precision Drilling Machine wirh a Moving Load Finite Element Model and Experimental Modal Data,” Proceedings of the 8th International Modal Analysis Conference,Vol.2, pp.827-832.

 Other Publications

  1. 林益煌，2007，輸送流體管樑之動態分析與振動控制(1/2)，國科會專題研究成果報告。
  2. 林益煌，2006，壓電慣性制動器應用於輸送流體之懸臂提摩憲柯管樑的被動與主動振動制抑，國科會專題研究成果報告
  3. 林益煌，2005，具半正定特性之轉子的獨立模態振動控制，國科會專題研究成果報告。 
  4. 林益煌，2004，空壓機閥片異常自動監診精簡系統之開發研究，中國鋼鐵股份有限公司建教合作委託專題研究成果報告。
  5. 林益煌，2004，輸送流體之提摩憲柯管樑的結構及控制系統同步最佳化設計，國科會專題研究成果報告。 
  6. 林益煌，2003，不穩定旋轉軸之強健振動制抑，國科會專題研究成果報告。 
  7. 林益煌，2003，軸系迴旋強迫振動分析系統開發，中國造船股份有限公司建教合作委託專題研究成果報告。 
  8. 林益煌，2003，空氣壓縮機閥片異常自動診斷技術之研究，中國鋼鐵股份有限公司建教合作委託專題研究成果報告
  9. 林益煌，2002，往復式機械之振動監測及診斷，中國鋼鐵股份有限公司建教合作委託專題研究成果報告。 
  10. 林益煌，2001，一般性動態系統獨立模態控制之基礎問題研究，國科會專題研究成果報告。